
09Basic Adjustment Settings
Power Control
Power Control provides convenient functions for power saving.
Power Control for AV source
Energy Save
Power consumption is saved by decreasing picture brightness.
1Press HOME MENU.
2Press /
to select “Power Control”, and then press ENTER.
3Press /
to select “Energy Save”, and then press
ENTER.
4Press /
to select “Save”, and then press
ENTER.
Item | Description |
Standard | Does not decrease picture brightness. |
(factory default) |
|
|
|
Save | Decreases picture brightness to save |
| power. |
|
|
5Press HOME MENU to exit the menu.
•You can also select this function using the Home menu when the input source is a PC.
54
En
No Signal off
The system will be automatically placed into the standby mode if no signal is received for 15 minutes.
1Press HOME MENU.
2Press /
to select “Power Control”, and then press ENTER.
3Press /
to select “No Signal off”, and then press ENTER.
4Press /
to select “Enable”, and then press
ENTER.
Item | Description |
Disable | Does not place the system into the |
(factory default) standby mode. | |
|
|
Enable | Places the system into the standby mode if |
| no signal is received for 15 minutes. |
|
|
5Press HOME MENU to exit the menu.
•Five minutes before the system is placed into the standby mode, a message appears every minute.
•The system may not be placed into the standby mode when noise signals are present at the Media Receiver after a TV program finishes.
54 | 7/24/03, 1:59 PM |