Pioneer PDP 5040HD, PDP 4340HD manual Watching digital TV channels, Selecting the digital TV input

08Basic Operations

Plasma Display (right view)

CHANNEL +/–

Channel display

PENDING

34

En

Watching digital TV channels

Unless you set up digital TV channels that you can watch under the current conditions, you cannot tune in those channels. For the procedure, see “Setting up digital TV channels” on page 44.

Selecting the digital TV input

After confirming that the Mode switch on the remote control unit has been set to “TV”, press DTV on the remote control unit to select the input source for digital TV channels.

Changing channels

Using CH +/– on the remote control unit

•Press CH + to increase the channel number.

•Press CH – to decrease the channel number.

•CHANNEL +/– on the Plasma Display operates the same as CH +/–.

Using CH RETURN on the remote control unit

Press CH RETURN to switch the currently tuned channel to the previously tuned channel.

Press CH RETURN again to switch back to the currently tuned channel.

Using 0 – 9 and • (dot) on the remote control unit

Select channels directly by pressing buttons 0 to 9. To select subchannels, also use the • (dot) button.

EXAMPLE

•To select channel 5 (1-digit channel), press 5.

•To select channel 25 (2-digit channel), press 2, followed by 5.

•To select channel 125 (3-digit channel), press 1, then 2, followed by 5.

•To select subchannel 2.1, press 2, • (dot), then 1.

•To select subchannel 10.1, press 1, 0, • (dot), then 1.

•After entering a channel or subchannel number, you may press CH ENTER to tune in the channel more quickly.

PDP5040HD-Eng (28-37) 34 7/24/03, 1:58 PM