Basic Adjustment Settings | 09 |
Setting up conventional TV channels
This section describes how to search and set up conventional TV channels that you can watch under the current conditions. Unless you set up conventional TV channels using Auto channel Preset, you may not be able to tune in those channels.
•Conventional TV channels in this manual designate TV channels that are received through the conven- tional VHF/ UHF frequencies or conventional cable TV channels.
Using Auto Channel Preset
Auto Channel Preset automatically searches and sets up conventional TV channels.
1Press HOME MENU.
2Press 
/
to select “Setup”, and then press
ENTER.
3Press 
/
to select “Channel Setup”, and then press ENTER.
4Press 
/
to select “Auto Channel Preset”, and then press ENTER.
5Press 
/
to select “Antenna”, and then press 
/
to select “A” or “B”.
6Press 
/
to select “Air/Cable”, and then press 
/
to select “Air” or “Cable”.
7Press 
/
to select “Preset:Start”, and then press
ENTER.
• Channel search automatically starts.
•To quit Auto Channel Preset halfway, press
RETURN.
8After Auto Channel Preset has been finished, press HOME MENU to exit the menu.
•When using the Cable Converter, you may need to manually add Cable Converter output channels.
English
41
En
41 | 7/24/03, 1:59 PM |