Sennheiser FT-902S50, FT-906B20, FT-905A manual Adjustment, Receiver operation remains unaffected

Page 19

Adjustment

4.1.1

MANIPULATION

Depress an arbitrary menu key on the EM 1046 RX receiver module:

Y

or:

N

or:

SET

or:

ESC

Different functions can be selected from the menu by depressing the following keys:

N DOWN

Y

UP

NOTA BENE

Depress

ESC

to return to the previous level.

This key also serves to stop data entry in case of errors.

DIVERSITY MENU

A B

Y

N

SET

ESC

FUNCTION

 

DISPLAY (RX)

The receiver switches to the menu mode. It is now ready for data entry.

Receiver operation remains unaffected.

The receiver is not set to the new parameters unless the new data are stored!

Selection of receiver frequencies

Please see chapter 4.1.2

Squelch

Please see chapter 4.1.3

LED bargraph displays for RF signal level/ deviation/battery condition

Please see chapter 4.1.4

Display - text or frequency

Please see chapter 4.1.5

Text

Please see chapter 4.1.6

Display of EM 1035 RX configuration and identification data

Please see chapter 4.1.7

Battery condition (SK 50/250)

Please see chapter 4.1.8

EM 203, Publ. 10/94 engl

19

Image 19
Contents Instruction for USE LED indicators Monitor headphones Important Information IntroductionTechnical overview Computer control Diversity HiDyn plus Dynamics of the AF Input SignalBlock diagram EM Possible transmitter Receiver combinations EM 203 receiver SK 2012 TV HiDyn plus SKM 4031 TV-HiDyn plus EM 1046/2.2 SK 50 UHF / SK 250 UHF SKM EM 203 receiver SER 20 transceiver Putting the EM 203 receiver To work Mains connection Nota Bene Start-up procedure Operating indicationsAvailable modules EM 1046 RX Receiver module Monitor EM 1046 RX receiver module Operating Elements on the EM 1046 RX Module Receiver operation remains unaffected AdjustmentManipulation Function Display RX Use keys Additional frequencies can be selected, if Subsequently RF signal level/deviation/batery condition From page 24, CH Nota Bene From page 26, CH From page 27, CH Display4.1.5 Text/frequency/battery condition Display indicates again To stop storage EM 1046-U-H System configurations Identification dataRemote monitoring Transmitter battery Manipulation Function SET SET ESC Operating Elements LED indicators Monitor headphonesLED indicators Nota Bene Technical data Sennheiser Electronic KG