Selection | 4.1.4 |
RF signal level/deviation/batery condition |
|
DIVERSITY
A 
B
MENU
Y |
N |
SET
ESC
MANIPULATION
Choose option "DEV", "RF" or "BAT" to indicate the RF signal level, deviation or battery condition.
Depress key | SET |
to allow selection.
Depress key
Y |
N 
to select the parameters to be indicated.
FUNCTION |
| DISPLAY (RX) |
It is useful to have permanent settings to facilitate
DEVIATION/FIELD STRENGTH OF THE ACTIVE CHANNEL
FIELD STRENGTH OF CHANNELS A AND B (DIVERSITY)
COMPARISON BETWEEN DEVIATION OF CHANNEL A
AND B (DIVERSITY)
TRANSMITTER BATTERY CONDITION/FIELD STRENGTH
FOR FURTHER INFORMATION ON DATA INDICATED PLEASE REFER TO THE FOLLOWING PAGES!
After you have selected the data to be indicated,
depress
| SET |
and subsequently | The new setting is stored. |
|
Y | Y = YES ! |
or depress | N | N = NO ! |
|
| |
or | ESC |
|
to stop storage. |
|
|
The display changes to „Menu“.
The program returns to the original setting, e. g.
New data can be selected, if need be. The program returns to the menu. The display shows:
EM 203, Publ. 10/94 engl | 24 |