Sennheiser FT-906B20, FT-905A, FT-902S35, FT-906A20, FT-902S15, FT-902S50 manual Use keys

Page 21

CONTINUED FROM PAGE 20 / CH. 4.1.2

MANIPULATION

FUNCTION

DISPLAY (RX)

Use keys

Y

UP

N DOWN

to select a receiver frequency as per pre-programmed parameters.

•Keeping the key depressed acdelerates selection.

•Freely selectable receiver frequencies can easily be adjusted in a 5 kHz grid. The unit changes automatically from one grid to another.

•For standard frequencies the display automatically switches to the next channel.

Depress

SET

to store new frequency.

NOTA BENE

Depress

ESC

to return to the previous level.

This key also serves to stop data entry in case of errors.

Receiver operation remains unaffected.

The receiver is not set to the new parameters unless the new data are stored!

EM 203, Publ. 10/94 engl

21

Image 21

Contents Instruction for USE LED indicators Monitor headphones Important Information IntroductionTechnical overview Computer control Diversity HiDyn plus Dynamics of the AF Input SignalBlock diagram EM Possible transmitter Receiver combinations EM 203 receiver SK 2012 TV HiDyn plus SKM 4031 TV-HiDyn plus EM 1046/2.2 SK 50 UHF / SK 250 UHF SKM EM 203 receiver SER 20 transceiver Putting the EM 203 receiver To work Mains connection Nota Bene Start-up procedure Operating indicationsAvailable modules EM 1046 RX Receiver module Monitor EM 1046 RX receiver module Operating Elements on the EM 1046 RX Module Receiver operation remains unaffected AdjustmentManipulation Function Display RX Use keys Additional frequencies can be selected, if Subsequently RF signal level/deviation/batery condition From page 24, CH Nota Bene From page 26, CH From page 27, CH Display4.1.5 Text/frequency/battery condition Display indicates again To stop storage EM 1046-U-H System configurations Identification dataRemote monitoring Transmitter battery Manipulation Function SET SET ESC Operating Elements LED indicators Monitor headphonesLED indicators Nota Bene Technical data Sennheiser Electronic KG