Sennheiser FT-906A20, FT-906B20, FT-905A, FT-902S35, FT-902S15, FT-902S50 manual Nota Bene

Page 38

Monitor headphones

4.2.2

POWER

+ 12 V

- 12 V

+ 5 V

DC - A

DC - B

OL - A

OL- B

REMOTE

+ 20

dB

+ 20 dBu

FUNCTION

The monitor socket is suited to connect mono or stereo headphones with an impedance of about 50 to 300 Ω .

The rotary switch serves to adjust the volume.

The "+ 20 dB" switch increases the signal level at the monitor socket by 20 dB. This facilitates the identification of residual noise.

NOTA BENE

The max. output level at the monitor socket amounts to + 18 dBm.

Check the setting if audible distortions occur.

EM 203, Publ. 10/94 engl

38

Image 38

Contents Instruction for USE LED indicators Monitor headphones Introduction Important InformationTechnical overview Computer control Diversity Dynamics of the AF Input Signal HiDyn plusBlock diagram EM Possible transmitter Receiver combinations EM 203 receiver SK 2012 TV HiDyn plus SKM 4031 TV-HiDyn plus EM 1046/2.2 SK 50 UHF / SK 250 UHF SKM EM 203 receiver SER 20 transceiver Putting the EM 203 receiver To work Mains connection Start-up procedure Operating indications Nota BeneAvailable modules EM 1046 RX Receiver module Monitor EM 1046 RX receiver module Operating Elements on the EM 1046 RX Module Adjustment Receiver operation remains unaffectedManipulation Function Display RX Use keys Additional frequencies can be selected, if Subsequently RF signal level/deviation/batery condition From page 24, CH Nota Bene From page 26, CH From page 27, CH Display4.1.5 Text/frequency/battery condition Display indicates again To stop storage System configurations Identification data EM 1046-U-HRemote monitoring Transmitter battery Manipulation Function SET SET ESC LED indicators Monitor headphones Operating ElementsLED indicators Nota Bene Technical data Sennheiser Electronic KG