System configurations | 4.1.7 |
and identification data |
|
DIVERSITY
A 
B
MENU
Y |
N |
SET
ESC
MANIPULATION |
| FUNCTION |
| DISPLAY (RX) |
Choose the option to set the display (ch. 4.1.1).
DepressSET
to return to the display mode.
The receiver specifications are stored in every single module:
The display indicates the
MODEL/SERIES
•EM
UHF ( 450 - 790 MHz)
•EM 1046-U-H
UHF ( 630 - 960 MHz)
Use
Y
SERIAL NUMBER OF THE MODULE
or
N 
to select the parameter to be indicated.
Scrolling is stopped by keeping
SET
depressed.
NOTA BENE
Depress
ESC
to return to the previous level.
This key also serves to stop data entry in case of errors.
Every module has a serial number to facilitate its identification. The serial number cannot be changed.
FREQUENCY RANGE OF THE MODULE
The display shows the standard frequencies or frequency ranges.
SOFTWARE VERSION
Shows the version of the software used.
HARDWARE VERSION OF THE MODULE
1Version of the analog section (information for Sennheiser's Service Department or Sennheiser distributors)
2Version of the digital section (information for Sennheiser's Service Department or Sennheiser distributors)
It is entered by Sennheiser electronic KG or your Sennheiser distributor, if ordered.
EM 203, Publ. 10/94 engl | 31 |