Sennheiser FT-905A, FT-906B20, FT-902S35, FT-906A20 manual Additional frequencies can be selected, if

Page 22

CONTINUED FROM PAGE 21 / CH. 4.1.2

MANIPULATION

Depress

Y

Y = YES !

FUNCTION

DISPLAY (RX)

The new frequency is stored in the memory. The EM 1046 RX receiver module switches to the new frequency selected.

For a short time the display indicates

to store data

or depress				The program returns to the selection mode.
		N		N = NO !

or				Additional frequencies can be selected, if
ESC				need be. The program returns to the menu.
to stop storage.				The display shows:

NOTA BENE

Depress

ESC

to return to the previous level.

This key also serves to stop data entry in case of errors.

EM 203, Publ. 10/94 engl

22

Image 22

Contents Instruction for USE LED indicators Monitor headphones Introduction Important InformationTechnical overview Computer control Diversity Dynamics of the AF Input Signal HiDyn plusBlock diagram EM Possible transmitter Receiver combinations EM 203 receiver SK 2012 TV HiDyn plus SKM 4031 TV-HiDyn plus EM 1046/2.2 SK 50 UHF / SK 250 UHF SKM EM 203 receiver SER 20 transceiver Putting the EM 203 receiver To work Mains connection Start-up procedure Operating indications Nota BeneAvailable modules EM 1046 RX Receiver module Monitor EM 1046 RX receiver module Operating Elements on the EM 1046 RX Module Adjustment Receiver operation remains unaffectedManipulation Function Display RX Use keys Additional frequencies can be selected, if Subsequently RF signal level/deviation/batery condition From page 24, CH Nota Bene From page 26, CH From page 27, CH Display4.1.5 Text/frequency/battery condition Display indicates again To stop storage System configurations Identification data EM 1046-U-HRemote monitoring Transmitter battery Manipulation Function SET SET ESC LED indicators Monitor headphones Operating ElementsLED indicators Nota Bene Technical data Sennheiser Electronic KG