Panasonic LQ-MD800P manual Using the Search Program, Erasing programs Erase

Using the SEARCH PROGRAM (continued)

Erasing programs (Erase)

RAM DVD-R

The program is erased completely when you use this procedure and cannot be retrieved. Check the program carefully before erasing it to ensure it isn’t one you want to keep.

(1)Press [SEARCH].

(2)Use [ , ] to select the desired program.

(3)Use [ ] so the submenu appears.

(4)Use [ , ] to select “Erase” and press [ENTER].

(5)Use [ ] to select “Erase”.

Checking program contents (Properties)

RAM DVD-R

You can check the contents of a selected program.

After performing steps (1) to (3) of “Erasing programs”, perform the following steps:

(4)Use [ , ] to select “Properties” and press [ENTER].

•The contents of the program are shown.

(6) Press [ENTER].

To stop partway through

Select “Cancel” in step (5) and press [ENTER] or [RETURN].

For your reference:

•The disc’s available recording time may not increase after erasing short programs.

•Computer data is not erased.

•The available recording time on DVD-R does not increase when you erase programs.

Entering and editing program titles (Enter Title)

RAM DVD-R

After performing steps (1) to (3) of “Erasing programs”, perform the following steps:

(4)Use [ , ] to select “Enter Title” and press [ENTER].

(5)Enter or edit the title.

To return to the previous screen

Press [RETURN].

Protecting programs/Releasing program protection (Protection)

RAM

You can prevent accidental erasure of programs by write-protecting them.

After performing steps (1) to (3) of “Erasing programs”, perform the following steps:

(4)Use [ , ] to select “Protection” and press [ENTER].

(5)Use [ ] to select “Yes” and press [ENTER].

The padlock mark appears. The padlock mark disappears.

To stop partway through

Select “No” in step 5 and press [ENTER] or [RETURN].

For your reference:

• Programs will be erased even if they are protected if you format

the disc with DISC INFORMATION.

(see page 32)

For your reference:

•You can give DVD-RAM titles of up to 64 characters

•The 33rd letter or later on some finalized DVD-R may not be displayed due to the font size of titles.

•You can give DVD-R titles of up to 44 characters.

•The full title is shown in the “Properties” screen, but if you enter a long title, only part of it is shown in the program list.

– 26 –