Panasonic LQ-MD800P manual Error messages, On the monitor television

Error messages

On the monitor television

Error messages	Causes and solutions
No Disc.	• You haven’t inserted a disc. Correctly insert a disc that this unit can play.
	• The disc is upside down. If it is a single-sided disc, insert it so the label is facing up.
	• The disc isn’t on the tray correctly. See the instructions in playing discs for the correct way to
	set discs.
This is a non-recordable disc.	• The unit cannot record on the disc you inserted. The unit cannot record onto finalized DVD-R,
Cannot record.	DVD-Audio, DVD-Video, CDs or Video CDs. Insert a DVD-RAM or un-finalized DVD-R.
This disc is not properly formatted.	• You inserted an unformatted DVD-RAM. Format the disc with this unit.
Formatting is necessary using DISC
INFORMATION.
This disc cannot be read.	• You inserted an incompatible disc.
Please check write protect tab on the	• The write protect tab on the cartridge is set to “PROTECT”.
disc.	Use a ballpoint pen or similar to release the write protection.
Contents of this disc are protected.	• The program is write-protected. Release the protection with the search program.
	• The disc is write-protected. Release the protection with the disc protection sub menu of DISC
	INFORMATION.
Cannot finish recording completely.	• The program was copy-protected.
	• The disc is full.
	• Recording was not completed for some other reason.
Copying of this material is not	• The input signal is copy-protected.
allowed.
Cannot play.	• You cannot play the disc because there is no video recorded on it.
Cannot record on the disc.	• The disc is scratched. Use another disc.
	• The disc is dirty. Clean the disc as described in these operating instructions.
	• You inserted an incompatible disc.
Cannot record to the disc.	• TV system of the program or the input signal was different from the setting in SETUP.
TV system of input signal is different
to the setting in SETUP.
Disc is full.	• No space left on the disc. Create space by erasing any unwanted programs. Use a new disc.
This disc may not be played in your	• This unit can play DVD-R recorded and finalized with this unit. Do not play DVD Video.
region.
Error has occurred.	• Press the [ENTER] button. Recovery starts. When the display panel clears, turn off the unit
Please press ENTER.	and then turn it on. You cannot operate the unit during recovery.
Please check the disc.	• Check the discs for dirt or scratches.
Please change the disc.	• You can operate the unit using [OPEN/CLOSE		] only.
	• Press [OPEN/CLOSE	] to open the tray and eject a disc, the unit becomes off.
	• To continue play or recording, turn off the unit, turn it on and then insert another disc.
Finalizing is necessary for	• To enable playback of your DVD-R on compatible equipment, it is necessary to finalize it.
compatible playback.
Please check write protect tab.	• Release the protection on the DVD-RAM.
Character set of the disc is different.	• Because the character set of the disc is different from the set designated for each region, the
Cannot enter title.	operation cannot be allowed.
Character set of the disc is different.
This program cannot be edited.
Character set of the disc is different.
This play list cannot be edited.
Character set of the disc is different.
Cannot finalize.
No folder.	• There is no compatible folder in this unit.
	• The operation is prohibited by the disc or unit.

– 38 –