
Control reference guide (continued)
Rear Panel
VIDEO |
| VIDEO IN |
|
| |
|
|
|
| ||
Y | PB | PR |
|
|
|
VIDEO |
| VIDEO OUT |
|
| |
1 |
|
|
| ||
|
|
|
| ||
| CH1(A) | CH2(B) | CH1 | CH2 |
|
2 |
|
|
|
|
|
| AUDIO IN | AUDIO OUT | AUDIO | ||
DV IN PAUSE | MON | ||||
|
|
|
| ||
REMOTE |
|
|
|
|
|
~ AC IN
USB
VIDEO IN (BNC)
Composite signal input.
VIDEO OUT 1/2 (BNC)
Composite signal output.
Y, PB, PR (Component Video output) (BNC)
Component signal (Y, PB, PR) output.
S-VIDEO OUT (4P)
DV IN
DV input. Connect a
PAUSE REMOTE (Stereo mini jack)
External control jack for recording start and pause control. This jack also outputs a recording status signal.
Audio CH1 (A)/CH2 (B) input connector (PHONO)
Input for analog audio. If you have connected a microphone, use the Audio CH assignment with Mic setting in the SETUP menus to assign recording channels.
Equipotential terminal
When connecting this unit to any other component, make absolutely sure that it is properly grounded by connecting this terminal.
When connecting, use the socket and be sure to use wire with a
Security Lock
This can be used to connect a
Audio CH1/CH2 output connector (PHONO)
Analog audio output.
Audio Monitor output connector (PHONO)
Analog audio output. Use the Monitor setting item in the FUNCTION menus to assign the channel to be output.
More than 1.0 mm2
Power socket
Socket
USB Remote connector (Type-B connector)
Connect power cord (supplied).
USB terminal. Connect a computer or other control device to enable external control.
– 10 –