Panasonic LQ-MD800P manual Connecting and Setting up, Discs, Connecting a Monitor television

Discs (continued)

Types of disc for the type of connected monitor television

When you use the discs recorded either PAL or NTSC, refer to this table. If you select the same TV system (PAL or NTSC) setting for this unit and your monitor television as the disc you want to play, the picture can be clearer.

Type of monitor television	TV system	Yes/No
	on discs.
Multi system monitor	NTSC	Yes
television	PAL	Yes
NTSC monitor television	NTSC	Yes
	PAL	No
PAL monitor television	NTSC	Yes*1 (PAL60)
	PAL	Yes*2

You may be unable to use same functions or they may function incorrectly if the TV system for the unit is different to that for the disc.

*1 If your monitor television is not equipped to handle PAL 525/60 signals the picture will not be shown correctly.

*2 If you set the TV system of this unit to “PAL”, the picture may be clearer.

Connecting and Setting up

Put the unit on a stable, horizontal surface where it will not be exposed to excessive dust. Do not block its vents or place where it can become hot.

First of all, please disconnect AC mains leads of all units, which you are going to connect with before connecting and disconnecting cables. Reconnect the AC mains leads when all connections are complete. Read the instructions for the other units carefully.

Audio/video input will not be output if this unit is switched off or malfunctions. Consider other connections in the system when outputting audio/video for the purpose of monitoring input. To record essential material, use multiple units to record at the same time, or make other similar allowances in your system setup.

Connecting a Monitor television

Composite video, monaural audio terminals

Video cable (BNC)

Audio cable (PHONO)

AC mains lead (supplied)

VIDEO		VIDEO IN				~ AC IN
			S-VIDEO
Y	P	P
VIDEO		VIDEO OUT
1			S-VIDEO
	CH1(A)	CH2(B)	CH1	CH2
2
IN PAUSE	AUDIO IN		AUDIO OUT		RS-232C	USB
REMOTE

AUDIO	VIDEO	VIDEO	AUDIO
IN	IN	OUT
			MONO
			OUT

Component video terminals

Component video (BNC x 3)

Stereo Audio cable (PHONO x 2)

AC mains lead (supplied)

COMPONENT	VIDEO		VIDEO IN	~ AC IN
		Y	PP
			S-VIDEO
VIDEO IN	VIDEO		VIDEO OUT
	1		S-VIDEO
Y PB PR	2		CH1 CH2
			AUDIO
	DV IN		MONRS-232C	USB

AUDIO AUDIO

IN OUT

S-Video, stereo audio terminals

S-Video cable (4P)

Stereo Audio cable (PHONO x 2)

To set to progressive output mode

(1) While stopped, press [MENU (SHIFT + SEARCH) ]

to show the MENU window.

(2) Use [ , , , ] to select the “SETUP” and

AC mains lead (supplied)

AUDIO	S-VIDEO
IN	IN

S-VIDEO
	OUT
VIDEO		VIDEO IN
		S-VIDEO
Y	P	P
VIDEO		VIDEO OUT
1		S-VIDEO
	CH1(A)	CH2(B) CH1	CH2
2
	AUDIO IN		AUDIO
DV IN PAUSE			MON
REMOTE
AUDIO
OUT

~ AC IN

RS-232CUSB

	press [ENTER].
(3)	Use [	,	] to select the “Connection” and press
	[ ] or [		].
(4) Use [		,	] to select “TV System” and press
	[ENTER].
(5)	Use [	,	] to select “NTSC” and press [ENTER].
(6)	Use [	,	] to select “Progressive (NTSC)” and
	press [ENTER].
(7) Use [		,	] to select “On” and press [ENTER].

To return to the previous screen

Press [RETURN].

– 12 –