Setup program
The setup program is to set communication ports and various operation modes and to carry out calibration or so on. Performing setup in the initial state saves the modified contents in “tpdrv.ini” setting file in “C:\Program Files\tpdrv” folder. Those contents are still valid at the time of the next startup.
Setup of a basic Screen
(see page 24)
Pressing any button displays the setting window relative to that item to permit changes in set values. Changes to each item are reflected to the driver software in operation when closing the window.
Pressing the [Close] button after completion of all settings records all set values in “tpdrv.ini”.
Adds a Setup Program short cut onto the task bar.
Cursor Position Fine Adjustment
As the result of carrying out calibration, the mouse cursor appears at the touched position normally.
If the cursor position is off slightly for some reason, use these buttons.
Calibration Screen (see page 26)
Target is displayed in the order of upper left, buttom left and upper right. And calibration is completed.
Touch a target
(Press any key for cancellation.)
User Setting (see page 27)
23