Installation of the Touch Panel Driver

Installation of the Touch Panel Driver

Install Touch Panel Driver

The CD-ROM contains two different types of control software installers (one for Windows 98SE and Windows ME, and one for Windows 2000 and Windows XP). Start

OS	CD-ROM (Installer)

Windows 98SE

the set-up file corresponding to the OS you are using.

Windows Me

\English\Win9x_me\setup.exe

Note:

Windows 2000

When a previous version driver software has been installed, first uninstall it and then install the new driver software.

Windows XP

\English\Win2k_xp\setup.exe

Load the included CD-ROM into a system CD drive. (We will assume here that this is the D drive.)

(1)Select [Start] [Run…].

(2)In the [Name] field, input

“D:\English\Win9x_me\setup.exe” or

“D:\English\Win2k_xp\setup.exe”. (Input the applicable file name for the OS you are using.)

(3)Click the [OK] button.

The setup program will start.

1Click this button to continue.

2Click to start.

In the default, it is registered as the startup program. The driver software will start up automatically the next time the unit is turned on.

3Click to continue.

The required file is copied.

Installation ends.

4Click to end installation of Touch Panel Driver.

Driver software starts when the PC is restarted after installation is finished.