Panasonic TY-TP50P6-S, TY-TP42P6-S manual About the COM port

Page 20

Installation of the USB Driver

About the COM port

When it is set up, the USB driver is recognized as a COM port of the PC. Specify this COM number when you don't use an automatic connection. The setup number varies in the use environment of the PC.

Notes for Installation of USB driver

(Windows 2000/XP)

After the installation of the driver is completed, a new hardware wizard will not be displayed even if a USB cable is re-connected to the PC.

However, it is recognized as a new hardware, and a setup wizard is indicated when it is connected to a port which is different from the USB port which did the setup of the driver. In this case, cancel the setup, and connect it to the USB port, where the driver was setup.

If you unplug and plug USB cable quickly, the PC sometimes does not recognize it.

In that case, please reboot PC.

If running Windows XP, the PC may not automatically recognize hardware on insertion or removal of USB cables. It is recommended that Windows XP Service Pack 1 is installed.

20

Image 20

Contents TY-TP50P6-S Operating InstructionsTable of Contents Precautions Setup location Maintenance Cleaning of the infrared transmissive areaIf something abnormal happens If the equipment starts to smoke or emit a strange odorAccessories Touch panel unitSetup procedure Attachment of the touch panel to the plasma display Attach the mounting bracket and conductivity tapeAttachment of the touch panel to the plasma display Connection with computer Installation of the USB driverConnection between the computer and plasma display Operating environment Installation of the USB DriverFunction Install USB Driver Installation of the USB Driver COM port number is confirmed with Device ManagerCase of Windows ME Installation of the USB Driver Case of Windows Installation of the USB Driver Case of Windows XP Installation of the USB Driver About the COM port Installation of the Touch Panel Driver Install Touch Panel DriverUninstallation of the Touch Panel Driver USB driver softwareSetup program Setup of a basic ScreenCursor Position Fine Adjustment User Setting seeSetup program Setup of basic settingsTouch Pen ID indication Calibration Screen User Setting Touch Pen SwitchDouble click Time Double click AreaClick Mode TroubleShooting Before requesting repairsSpecifications Model Number TY-TP42P6-S TY-TP50P6-SExternal dimensions TY-TP42P6-S External dimensions TY-TP50P6-SCustomer’s Record