Panasonic TY-TP42P6-S, TY-TP50P6-S manual TroubleShooting, Before requesting repairs

Page 29

TroubleShooting

Before requesting repairs

Please check the following points.

Symptom

 

Check

 

 

 

No response at all to

Check the USB cable

 

input

Check that the USB cable is securely connected.

 

Check extraneous light

 

 

Check whether there is (or might be) any equipment in the surrounding area that

 

uses a powerful light source or infrared light. The touch panel is an optic type that

 

uses infrared light. Extraneous light containing infrared radiation may interfere with

 

operation.

 

 

Fluorescent lamps:

These are not a problem because they do not produce

 

 

infrared light.

 

Sunlight:

This is not a problem if there is no direct exposure.

 

Incandescent light bulbs: These require caution because they produce the most

 

 

infrared light. Keep such light sources as far away as

 

 

possible from the touch panel.

 

 

 

Suddenly stops

Check extraneous light

 

responding during

Check whether there is (or might be) any equipment in the surrounding area that

operation

uses a powerful light source or infrared light. The touch panel is an optic type that

 

uses infrared light. Extraneous light containing infrared radiation may interfere with

 

operation.

 

 

Fluorescent lamps:

These are not a problem because they do not produce

 

 

infrared light.

 

Sunlight:

This is not a problem if there is no direct exposure.

 

Incandescent light bulbs: These require caution because they produce the most

 

 

infrared light. Keep such light sources as far away as

 

 

possible from the touch panel.

 

Check for incorrect operation due to electrical noise

 

The microcomputer in the Touch Panel may operate incorrectly if any sources of

 

electrical noise are close to it. Keep such sources of electrical noise as far away as

 

possible from the Touch Panel.

 

 

Response is slow

Check for incorrect operation due to electrical noise

 

The microcomputer in the Touch Panel may operate incorrectly if any sources of

 

electrical noise are close to it. Keep such sources of electrical noise as far away as

 

possible from the Touch Panel.

 

Check object used for input (not by finger)

 

Check whether input is being done using an object smaller than a finger.

 

If input is attempted using an object smaller than 6 mm x 6 mm wide, the intermediate

 

coordinates of the infrared beam may not be detected. Do not attempt to enter data

 

using a device with dimensions of 2 mm by 2 mm or less.

 

This may slow detection or result in no detection at all.

 

 

There are times when

Check object used for input (not by finger)

there is no response

Check whether input is being done using an object smaller than a finger.

 

If input is attempted using an object smaller than 6 mm x 6 mm wide, the intermediate

 

coordinates of the infrared beam may not be detected. Do not attempt to enter data

 

using a device with dimensions of 2 mm by 2 mm or less.

 

This may slow detection or result in no detection at all.

 

Did you touch the infrared transmissive area on the screen before the PC had

 

completed the starting of its OS?

 

If so, please restart your PC.

 

 

 

29

Image 29
Contents Operating Instructions TY-TP50P6-STable of Contents Precautions Setup location Cleaning of the infrared transmissive area MaintenanceIf something abnormal happens If the equipment starts to smoke or emit a strange odorTouch panel unit AccessoriesSetup procedure Attach the mounting bracket and conductivity tape Attachment of the touch panel to the plasma displayAttachment of the touch panel to the plasma display Connection with computer Installation of the USB driverConnection between the computer and plasma display Operating environment Installation of the USB DriverFunction Install USB Driver COM port number is confirmed with Device Manager Installation of the USB DriverCase of Windows ME Installation of the USB Driver Case of Windows Installation of the USB Driver Case of Windows XP Installation of the USB Driver About the COM port Install Touch Panel Driver Installation of the Touch Panel DriverUSB driver software Uninstallation of the Touch Panel DriverSetup of a basic Screen Setup programCursor Position Fine Adjustment User Setting seeSetup of basic settings Setup programTouch Pen ID indication Calibration Screen Touch Pen Switch User SettingDouble click Time Double click AreaClick Mode Before requesting repairs TroubleShootingModel Number TY-TP42P6-S TY-TP50P6-S SpecificationsExternal dimensions TY-TP50P6-S External dimensions TY-TP42P6-SCustomer’s Record