Panasonic CQ-D1703N manual Select each item Finish the setting, TV Display Mode, Ntsc

e Select each item.	r Finish the setting.
Press one of the numeric buttons from [1] to [4].	Press [0] (Exit). (The setting is completed.)
(Example: “2. Pan & Scan (4:3)”)	Note:

E

N

G

L

I

S

H

42

<TV Display Mode>

Select TV	1.	WIDE (16:9)
Display Mode	2.	Pan & Scan (4:3)
	3.	Letterbox (4:3)
	4.	Return

¡To apply changes to the setting, be sure to press [0] (Exit) at the end.

¡After the user settings have been changed and entered, the player returns to the start of the disc.

¡When the disc has predetermined language or other settings, the user settings are not reflected.

1. NTSC	The unit transmits the NTSC formatted signal in either case, playing an NTSC formatted video or a
	PAL formatted video.
2. PAL	The unit transmits the PAL formatted signal in either case, playing an NTSC formatted video or a
	PAL formatted video.
3. Multi	The unit transmits the same video signal as the output of playing video software.
	Note:
	¡If the connected monitor cannot automatically select between NTSC and PAL according to the
	video signal of the disc to be reproduced, images on the screen may be distorted. Select NTSC
	or PAL at the monitor side depending to the disc to be reproduced.

4.Return The display returns to “Setup Menu”.

1. WIDE (16:9) Plays in Wide mode when a wide-screen monitor is connected.

2.Pan & Scan (4:3) Plays in Pan & Scan mode when a conventional monitor is connected.

3.Letterbox (4:3) Plays in Letterbox mode when a conventional monitor is connected.

4. Return The display returns to “Setup Menu”.

Note:

¡If “Pan & Scan” or “Letterbox” is already set in the software, this setting is ignored.

1. ON	When power is turned on, On-Screen Display message such as “Play” and “Pause”
	will be displayed on the screen for 5 seconds.
2. OFF	When power is turned on, On-Screen Display messages such as “Play” and
	“Pause” will not be displayed on the screen.

3.Return The display returns to “Setup Menu”.

1. Minimum	Most compressed mode: TV	Note:
	broadcasts ,etc	¡ When it is difficult to hear comparatively small
2. Standard	Mode recommended by software	sound (such as movie dialogue), setting “Minimum”
	creators for listening at low volumes.	will make those sounds easier to hear.
3. OFF	Does not compress the dynamic
	range.

4.Return The display returns to “Setup Menu”.

To return to the “Setup Menu” display, press [RET] (RETURN).

43

CQ-D1703N