Panasonic CQ-D1703N Even if an RDS station, Is tuned in to, No PS appears Receiving programs

E

N

G

L

I

S

H

57

Troubleshooting (continued)

■ RDS

Problem	Possible cause a Possible solution
PS does not appear	A PS code cannot be received for the reason of bad receiving conditions, etc.
even if an RDS station
	aA PS code appears if it is received. Wait for a while until conditions
is tuned in to.
	change.
(“NO PS” appears.)
Receiving programs	When the station changed between programs, the unit could not receive the
	PTY code.
differs from PTY that
	aAn appropriate programme is searched for and tuned in to after receiv-
was already set up.
	ing a corresponding PTY code. Therefore, wait for a while.
“NONE” appears	Any specified PTY programs cannot be received. There is no desired pro-
	gramme being broadcast in your area.
when selecting PTY.
	aSelect another PTY, or wait until a desired programme starts.
	The unit received a station broadcasting time that is not appropriate for you,
The clock time (CT) is	or the unit is receiving a station that does not broadcast time.
not accurate.	aReceive a station broadcasting time that is appropriate for your area, or
	adjust CT manually.
An AF station cannot	There is little difference in receiving conditions between the current station
	and AF stations. Update of the AF list ended in failure.
be received even if AF
	aWait until the AF list is successfully updated. For unstable reception,
indicator lights.
	tune in to a stable station by the hand.

■ CD

Problem	Possible cause a Possible solution
	The disc is inserted upside down.
No playback or disc	aInsert a disc correctly.
ejected	There is a flaw or foreign object on the disc.
	aRemove the foreign object, or use a flawless disc.
Sound skipping or
	There is a flaw or foreign object on the disc.
noise	aRemove the foreign object, or use a flawless disc.
	The unit is not sufficiently secured.
Sound skipping due to	aSecure the unit to the console box.
vibration	The unit is tilted at over 30˚ in the front-to-end direction.
	aMake the angle 30˚ or less.
	Something such as a peeled label obstructs the disc coming out.
	aConsult your dealer.
Disc unejectable	The microcontroller in the unit operates abnormally due to noise or other fac-
	tors.
	aUnplug the power cord and plug it again. In case the unit is still out of
	order, consult your dealer.

58

CQ-D1703N