Panasonic CQ-D1703N manual ISO Antenna, Adapter e

E	Wiring (continued)
G
N
L
I
S		Basic Connection
H	Caution
					VIDEO-OUT
51	¡Check the connectors provided on your car (see pre-			VIDEO-OUT (Yellow)
	caution below) before connecting the system.	ISO Antenna
	¡To prevent damage to the unit, be sure to follow the
		Adapter e
	connection diagram.	(If needed)
	¡Strip about 5 mm of the lead ends for connection
			Antenna
	(only non-ISO connector cords).
	¡Do not insert the power connector into the unit until
	the wiring is completed.

Precautions (ISO Connector)

¡The pin arrangement of the power connector con- forms to ISO standard.

¡The pin arrangement of ISO connectors in some cars may differ from the ISO standard.

¡Please check that the pin arrangement of the connec- tor in your car conforms to ISO standard.

¡For car types A and B, change the wiring of the red and yellow leads as shown at below.

¡After connection, insulate the portions marked (C) with insulating tape.

Note:

¡For cars other than types A and B, please consult your local car shop.

ISO Standard ISO

A7: IGN or ACC switched 12 V supply

A7	(Red) C	(Red)
		ACC
		BATTERY 15A
A4	(Yellow) C	(Yellow)

A4: +12 V Battery (Permanent supply)

ACar Type A

A7: +12 V Battery (Permanent supply)

(Red) C	(Yellow)
	BATTERY 15A
(Yellow) C	ACC
	(Red)

A4: IGN or ACC switched 12 V supply

BCar Type B

A7: +12 V Battery (Permanent supply)

(Red) C	(Red)
	ACC
(Yellow) C	BATTERY 15A
	(Yellow)

A4: No connection

52

CQ-D1703N

DVD Player/Receiver

Power Connector

13

2

*Fuse (15 A) Refer fuse replacement to your nearest authorized Panasonic Service Centre. Do not try fuse replace- ment by yourself.

CQ-D1703N