Panasonic DMP-BD50 warranty Display, Dts/Dts-Hd

“Audio”

Dynamic Range Compression [BD-V] [AVCHD] [DVD-V] [DivX]			≥On	≥Off
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)			≥Auto:	Effective only when Dolby TrueHD is played.
Change the dynamic range (> 40) for late night viewing.
Digital Audio Output
≥Press [OK] to show the following settings.
	Audio Priority Preset		≥Secondary:
	≥Select priority items for “Digital Audio Output”.		“BD-Video Secondary Audio” is set to “On”, and “Digital Audio Output” is
			fixed to “PCM”.
			≥Quality:
			“Digital Audio Output” is set to “Bitstream”, and ‘“BD-Video Secondary
			Audio” is fixed to “Off”.
			– If the connected equipment can only decode Dolby Digital or DTS, Dolby Digital
			Plus, Dolby TrueHD, and DTS-HD will be output as Dolby Digital or DTS.
			– If the connected equipment can only decode one of either Dolby Digital or DTS,
			please select “Custom” and set desire audio formats that cannot be decoded.
			≥Custom:
			Items in “Digital Audio Output” can be set individually. (> 17)
	Dolby D/Dolby D +/	Select whether Dolby Digital, Dolby	≥Bitstream:
	Dolby TrueHD	Digital Plus, Dolby TrueHD, DTS	Select “Bitstream” when the connected equipment can decode the
		Digital Surround, DTS-HD High	respective audio format.
	DTS/DTS-HD
		Resolution Audio or DTS-HD Master	– Connect equipment supporting HDMI Ver. 1.3 and use a High Speed
		Audio is output in “Bitstream” or	HDMI Cable in order to output high bit rate audio such as Dolby Digital
		“PCM” format.	Plus, Dolby TrueHD, DTS-HD High Resolution Audio or DTS-HD Master
			Audio.
		[Note]
			≥PCM:
		≥Not making the proper settings may
		result in noise.	Select “PCM” when the connected equipment cannot decode the
			respective audio format.
		≥If the unit is connected with the HDMI
			– When the unit is connected with the DIGITAL AUDIO OUT terminal,
		AV OUT terminal, the specifications of
			these audio formats are down-mixed to PCM 2ch.
		the connected equipment take
		preference over this unit and audio	Refer to the operating instructions for connected devices to verify whether or
		selected in these items may not be
			not they can decode each of the audio formats.
		output (e.g., when a television is
		connected, the HDMI audio output of
		this unit is limited to down-mixed 2ch.)
	BD-Video Secondary Audio [BD-V]		≥On:	The primary audio and secondary audio are mixed and output.
	Turn on/off the clicking sound on the menu and audio with			The sampling frequency is converted to 48 kHz.
	secondary video in picture-in-picture mode. (> 16)		≥Off:	The clicking sound on the menu and secondary audio are not
				output.
PCM Down Conversion			≥On:	Signals are converted to 48 kHz. (Choose when the connected
Select how to output audio with a sampling frequency of 96 kHz.				equipment cannot process signals with sampling frequency of
≥Signals are converted to 48 kHz despite the settings across in			≥Off:	96 kHz.)
	the following cases:			Signals are output as 96 kHz. (Choose when the connected
	– when the signals have a sampling frequency of over 96 kHz			equipment can process signals with sampling frequency of
	– when the disc has copy protection			96 kHz.)
	– when “BD-Video Secondary Audio” is set to “On”
Downmix			≥Stereo:	When connected to equipment that does not support
Switch the downmix system for playing back multi-channel				the virtual surround function.
surround sound.			≥Surround encoded: When connected to equipment that supports the
≥When “Digital Audio Output” is set to “Bitstream”, there are no				virtual surround function (Dolby Pro Logic, DTS
				Neo: 6, etc.)
	downmix effects for the outputted audio.
≥The audio will be outputted in “Stereo” in the following cases.
	– AVCHD playback
	– Playback of clicking sound on the menu and audio with
	secondary video in picture-in-picture mode

“Display”

Status Messages	≥Automatic	≥Off
Choose whether to show status messages automatically.
On-screen Language	≥English	≥Français	≥Español
Choose the language for these menus and on-screen messages.
Screen Saver Function	≥On:
This is to prevent burn-in on the screen.	If there is no operation for 10 minutes or more, the displayed screen
≥When this is set to “On”, the masked-off area on the screen	switches to the other states automatically.
becomes gray.	– When the Direct Navigator or FUNCTIONS menu is displayed, the
[Only when connecting with an HDMI cable or a component	display returns to the screen saver mode.
video cable and “HDMI Resolution” (> 28) is set to any other	– When CD or MP3 is played, the display returns to the screen saver
mode than “480p”, or “Component Video Resolution” (> 28) is	mode. (Playback continues.)
set to “720p” or “1080i”]	– When still pictures are shown (except for slideshows), the display returns
	to the Direct Navigator screen.
	≥Off
FL Display	≥Bright
Changes the brightness of the unit’s display.	≥Dim:	The display is dimmed.
	≥Auto:	The display is dimmed during playback and bright
		except playback.
SD Card LED Control	≥On	≥Off
Set the lighting method for the lamp on the SD card slot.	≥SD inserted:	When this unit is turned on and SD card is inserted, the
		lamp is lighted.
License	Information about the software used by this unit is displayed.

Settings

RQT9184

(ENG)

27