Panasonic DMP-BD50 warranty Card, Other difficulties with playback

Page 33

Card

 

Page

The capacity of the SD card

≥When a BD-Video that supports the virtual package is used, and an SD card is in the slot,

16

decreased.

data may be written to the SD card. Erase the data by using “BD-Video Data Erase”, format

 

 

the card or use a new card.

 

MPEG-2 motion pictures and

≥Data that can be played from an SD card are AVCHD and JPEG data.

5

music on an SD card cannot be

 

 

played.

 

 

 

 

 

The contents of the card

≥The card is not compatible or the contents on the card may be damaged.

5

cannot be read.

≥Turn off and then turn on the unit again.

—

Network

 

 

 

 

 

I can’t connect to the network.

≥Has the LAN cable come unplugged? Check that the LAN cable is properly connected.

9

 

≥Have you plugged in a modular cable for use with a telephone into the LAN terminal on this

9

 

unit? Connect with a straight LAN cable.

—

 

≥Is the power for the modem or broadband router turned on? Turn the power on for each

 

device.

—

 

≥Is there a mistake in the network settings? Follow any instructions you may have received

 

from your ISP (Internet Service Provider) and make changes to the settings.

—

 

≥Are the broadband router settings correct? Read the operating instructions for the broadband

 

router.

—

 

≥Is the broadband router and/or modem correctly connected? Check the operating

 

instructions for each device and connect accordingly.

26, 28

 

≥Check the “Network” and “BD-Live Internet Access” settings.

While using my PC, I cannot

≥Does your Internet Service Provider (ISP) or service contract prevent multiple terminals

—

connect to the network.

connecting at the same time? Check the content of your contract.

 

Other difficulties with playback

 

 

 

 

Audio and video momentarily

≥This occurs between playlist chapters or scenes ([AVCHD]).

—

pause.

≥When playing a title recorded on both layers, the unit automatically switches between layers

—

 

and plays the title in the same way as a normal program. However, video and audio may

 

 

momentarily cut out when the unit is switching layers.

 

BD-Video or DVD-Video is not

≥Ensure the disc is for the correct BD-Video region code or DVD-Video region number, and is

Cover

played.

not defective.

26

 

≥You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting.

 

≥Some BD-Video can only be output with HDMI.

—

Picture-in-picture is not played

≥Confirm whether the disc supports picture-in-picture.

—

with BD-Video.

 

 

The virtual package is not

≥Confirm whether the disc supports the virtual package.

16

played with BD-Video.

≥The inserted SD card does not have sufficient available capacity.

—

 

≥The SD card is write-protected.

5

 

≥Sub contents copied to an SD card are provided by the disc producer as a part of the

16

 

BD-Video content. Even if you record images and audio onto an SD card, it cannot be played

 

 

as a virtual package.

 

 

 

 

Alternative soundtrack and

≥The languages are not recorded on the disc.

—

subtitles cannot be selected.

≥You may not be able to use the on-screen menu to change the soundtrack and subtitles on

14

 

some discs. Use the disc’s menus to make changes.

 

No subtitles.

≥Subtitles are not recorded on the disc.

—

 

≥Turn the subtitles on. Set “Subtitle” on the on-screen menu to “On”.

24

 

≥When progressive output is on, closed captions cannot be displayed.

—

 

 

 

The subtitles overlap closed

≥Turn off the subtitles or turn off the closed caption setting on the TV.

24

captions recorded on discs.

 

 

Angle cannot be changed.

≥Angles can only be changed during scenes where different angles are recorded.

—

 

 

 

The resume play function does

≥Memorized positions are canceled when

—

not work.

– pressing [∫] several times.

 

 

– opening the disc tray.

—

 

≥The resume play function may not work depending on the disc.

 

≥[BD-V]: On BD-Video discs including BD-J, the resume play function does not work.

—

When other Panasonic products respond to this remote control

Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close

together.

1Press [SETUP].

2Press [3, 4] to select “Others” and press [OK].

3Press [3, 4] to select “Remote Control Code” and press [OK].

4Press [3, 4] to select the code (1, 2, or 3) and

press [OK].

5To change the code on the remote control

While pressing [OK], press and hold the numbered button ([1], [2] or [3]) for more than

5seconds. 6 Press [OK].

Remote Control Code

Set Code 1

Set Code 2

Set Code 3

Press [ ] and [OK] together for more than 5 seconds on

the remote.

When the following indicator

appears on the unit’s display and you are unable to operate the unit

NOTE

The unit’s remote control code

Press and hold [OK] and the indicated number button at the same time for more than 5 seconds.

Reference

RQT9184

(ENG)

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents If you have any questions contact Region management informationBD-Video DVD-VideoFollowing Applies only in the U.S.A FCC NoteAccessory information Table of contentsDisc and card information Packaged discsRecorded discs SD cards Using the remote controlRegarding BD-Video Discs that cannot be playedConnection Connecting to Component Video OUT terminalConnecting to Video OUT terminal Connecting to S Video OUT terminalAUDIO/VIDEO Video OUTConnecting to 5.1ch Audio OUT terminal Connecting to Digital Audio OUT terminalConnecting AC power supply cord Network connection Firmware updatingControl reference guide Setting the television and amplifier/receiver operation Easy SettingTesting the connection Network settingsSetting the IP address Setting the DNS-IPPress 3, 4 to select Proxy Address and press OK Setting the proxy serverPress 3, 4, 2, 1 to select a character Press OK Press 2, 1 to select Yes and press OKBasic play Playing video contents Status Status messages StopSearch/Slow-motion SkipEnjoying BD-LIVETMor Bonusview TM in BD-Video BD-V Virtual packageEnjoying BD-Live discs with Internet Regarding High Bit rate Audio Enjoying High Bit rate Audio and Video of BD-VideoSecondary QualityPlaying still pictures Jpeg Chapter playback DVD-VRUseful functions during still picture play Subtitles text language settings Regarding DivX VOD contentPlaying DivX videos DivX Displaying subtitles text 24, SubtitleShowing Functions menu Playing music CD MP3Press 3, 4 to select the track and press OK Press FunctionsMP3 Jpeg About MP3/JPEG/DivX filesEasy control only with Viera remote control Linked operations with the TVWhat you can do with Hdavi Control Changing settings with the on-screen menu On-screen menu operationsWhat you can change with the on-screen menu Play Menus Items Settings and detailsVideo AudioSetup menu operations Changing the unit’s settingsSummary of settings Press 3, 4, 2, 1 to select the option and press OKDTS/DTS-HD DisplayNetwork TV/Device ConnectionDelay time B Changing the speaker setting to suit your speakersOthers Speaker presence and size aTroubleshooting guide Frequently asked questionsSetup To reset this unitOperation PowerDisplays TV screen and videoHdmi connections SoundOther difficulties with playback CardMessages On the televisionOn the unit’s display or F ≥The firmware is being updatedStart UPD/Maintenance SpecificationsDisc and card handling To dispose or transfer this unitLimited Warranty only for U.S.A Panasonic Blu-ray Disc Player Limited WarrantyCentralized Factory Servicenter Limited Warranty only for Canada Product ServicePanasonic Canada Inc Preparación Pulse Í BD Power para encender la unidadStop Parada Cámara lentaAvchd GlossaryBD-J DTS-HDIf you see this symbol IndexCorporation of North America
Top Page Image Contents