Panasonic DMP-BD50 Changing the speaker setting to suit your speakers, Others, Delay time B

“Others”

Off Timer	≥2 Hours	≥6 Hours	≥Off
Select how long the unit remains on when it is not being
used.
Remote Control Code (> 33)	≥Set Code 1 ≥Set Code 2		≥Set Code 3
Easy Setting	≥Yes	≥No
You can execute basic settings (On-screen Language, TV
Aspect).
Restore Default Settings	≥Yes	≥No
This returns all values in the Setup menu and the on-screen
menu, except for “Remote Control Code”, “On-screen

Language”, “IP Address/DNS Settings”, “Proxy Server Settings”, “DVD-Video Ratings” and “BD-Video Ratings” to the default settings.

DivX Registration (> 20)

You need this registration code to purchase and play DivX Video-on-Demand (VOD) content.

Firmware Update (> 9)
≥Press [OK] to show the following settings.
	Automatic Update	≥On	≥Off
	When this equipment remains connected to the Internet,
	it will check for the latest firmware version when it is
	turned on and you can update it if necessary.
	Update Now	You can update the firmware manually.

Changing the speaker setting to suit your speakers

When connecting to an amplifier/receiver to enjoy multi-channel surround sound, use the following settings on this unit if they cannot be set on the amplifier/receiver.

The settings are not effective when outputting bitstream signals.

Preparation

Set “Speaker” to “Multi Channel”. (> 28)

		Center		￿￿￿￿￿￿￿
Front (L)	L	ms	C	dB	R	Front (R)
￿		0.0		0.0		￿
￿	dB				dB	￿
	0.0
					0.0
						Subwoofer
Complete
	Complete			dB	SW	￿￿￿￿
Test	Test			0.0

	dB	ms	dB
LS	0.0	0.0	0.0 RS
	LB	ms	RB
		0.0

(LS) Surround (RS)	(LB) Surround back (RB)§
￿￿￿￿￿￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿

§Surround back channel is enabled only when the unit is connected to an amplifier/receiver supporting HDMI 7.1 channel audio. [BD-V]: If the original audio is 5.1ch DTS-HD or DTS, the remapping function is activated to divide it to 7.1ch.

Speaker presence and size (A)

1Press [3, 4, 2, 1] to select the speaker icon (A) and press [OK].

2 Press [3, 4] to select the setting and press [OK].

Icon examples:
Surround speaker (LS)			LS		LS
≥Large:	Select when
	the speaker
		Large		Small		No
	supports
	low-frequency (under 100 Hz) reproduction.

≥Small: Select when the speaker does not support low-frequency reproduction.

In order to make an ideal listening environment, settings of speaker sizes may be automatically adjusted.

For example, if the subwoofer is set to “No”, the front speakers will automatically be set to “Large”. (In this case, we recommend connecting a speaker that can reproduce bass below 100 Hz.)

Delay time (B)

For optimum listening with 7.1/5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position.

If you have to place the center, surround and surround back speakers closer to the seating position, adjust the delay time to make up for the difference.

If either distance D or F is less than E, find the difference in the relevant table and change to the recommended setting.

5.1ch speaker			7.1ch speaker connection
connection
Approximate room dimensions						: Actual
	C			C
L	C	R	L	C	R	speaker
						position
					SW
						: Ideal
	D	E		D	E
		SW	LS LS		F RS RS	speaker
						position
		F			F
	LS	RS	LB		RB	D E F
						: Primary
	LS	RS	LB		RB	listening
Circle of constant primary listening distance						distance
D Center speaker				F Surround/Surround back
	Difference		Setting		speakers
Approx. 34 cm (1 ft. 1 in.)			1.0 ms		Difference	Setting
Approx. 68 cm (2 ft. 2 in.)			2.0 ms	Approx. 170 cm (5 ft. 6 in.) 5.0 ms
Approx. 102 cm (3 ft. 4 in.)			3.0 ms	Approx. 340 cm (11 ft. 1 in.) 10.0 ms
Approx. 136 cm (4 ft. 5 in.)			4.0 ms	Approx. 510 cm (16 ft. 8 in.) 15.0 ms
Approx. 170 cm (5 ft. 6 in.)			5.0 ms

Channel balance (C)

This does not work when connected with the HDMI terminal and “HDMI Audio Output” (> 28) is set to “On”.

1Select “Test” and press [OK].

A test signal is output.

Front (L)_—)Center_—)Front (R)_—)Surround (RS)

:;

Surround (LS)(— Surround Back (LB)§ (— Surround Back (RB)§

§Test signal is output only when the unit is connected using HDMI AV OUT terminal.

2While listening to the test signal, press [3, 4] to adjust the

volume of each speaker

Front speakers: 0.0 to s6.0 dB

Center and surround speakers: 0.0 to s12.0 dB

≥You cannot adjust the volume of surround back speakers.

3Press [OK].

The test signal stops.

≥No signal is output for the subwoofer. To adjust its volume, play something, then return to this screen to adjust to suit your taste.

4Press [OK].

Settings

1Press [3, 4, 2, 1] to select the delay time box (B) and press [OK].

2Press [3, 4] to select the setting and press [OK].

RQT9184

(ENG)

29