Panasonic DMP-BD50 warranty TV/Device Connection, Network

“TV/Device Connection”

TV Aspect		When connected to a 4:3 aspect television:
Set to match the type of television connected.		≥4:3 Pan & Scan:		Video recorded for a widescreen is played as Pan & Scan
				(unless prohibited by the producer of the disc). When playing
				BD-Video, video is output as “4:3 Letterbox”.
		≥4:3 Letterbox:		Video recorded for a widescreen is played in the letterbox
				style.
		When connected to a 16:9 widescreen television:
		≥16:9:		Video recorded for 4:3 aspect screen is displayed as a 4:3
				ratio image in the center of the screen.
		≥16:9 Full:		Video recorded for 4:3 aspect screen is displayed as a
				horizontally stretched 16:9 image.
HDMI Connection
≥Press [OK] to show the following settings.
	HDMI Video Mode	≥On:	Images are output from the HDMI terminal in the resolution set in “HDMI
	Select “On” when video is output from HDMI AV OUT		Resolution”. Video from COMPONENT VIDEO OUT terminal is output as
	terminal.		“480i”.
		≥Off	Images are output in the resolution set in “Component Video Resolution”.
	HDMI Resolution	≥Auto:		Automatically selects the output resolution best suited to the
	The items supported by the connected devices are			connected television (1080p, 1080i, 720p or 480p).
	indicated on the screen as “¢”. When any item without	≥480p		≥720p
	“¢” is selected, the images may be distorted.	≥1080i		≥1080p
		– When the unit is connected to an amplifier/receiver that does not support the
		resolution set on the unit, the video cannot be output properly. In this case, use
		the HDMI cable to connect the unit to the TV and then connect the unit to the
		amplifier/receiver using a cable other than HDMI.
		– To enjoy high definition video up-converted to 1080p, you need to connect the
		unit directly to 1080p compatible HDTV (High Definition Television). If this unit is
		connected to an HDTV through other equipment, it must also be 1080p
		compatible.
	24p Output [BD-V] [DVD-V]	≥On:	Images in 24p are output in 24p as they are.
	When this unit is connected to a TV supporting 1080/24p		However,
	output via an HDMI cable, this unit displays each frame at		–when video is being output at 24 frames, images from any other
	1/24 second intervals – the same interval originally shot		terminal than the HDMI terminal may not be output properly.
	with the film camera.		–[BD-V]:when images other than 24p are played, images are output at
	≥When playing DVD-Video, set to “On” and then set “24p”	≥Off	60p.
	in “Video” (> 25) to “On”
	HDMI RGB Output Range	≥Standard:		The video is output as it is.
	Effective when connected to a device that only supports	≥Enhanced:		When the black and white contrast of a video is low, the signal
	RGB output.			is enhanced to reproduce clear video.
	HDMI Audio Output	≥On:
	This setting selects whether or not to output audio from	≥Off:	When the TV is connected to this unit using an HDMI cable, and this unit
	HDMI.		is also connected to other devices, such as an amplifier/receiver using an
			optical digital audio cable or a coaxial cable.
	VIERA Link	≥On:
	Set to use “HDAVI Control” function when connected with	≥Off:	Select when you do not want to use “HDAVI Control”.
	an HDMI cable to a device that supports “HDAVI Control”.
Component Video Resolution		≥480i	≥480p	≥720p ≥1080i
This sets the video output resolution when using the		Even if you select “720p” or “1080i”, the video output resolution is restricted to
component video terminal.
		“480p” when images of DVD-Video discs are output from the COMPONENT
		VIDEO OUT terminals.
Speaker		≥Multi Channel:		When using 3 or more speakers. (> 29)
You can set the unit to output the best possible sound for		≥2 Channel:		When using two speakers.
your speakers.				2ch down-mix audio are output from Front L and Front R.

“Network”

IP Address/DNS Settings (> 12)

≥Press [OK] to show the following settings.

	Connection Test	— — — —
	IP Address Auto Configuration (DHCP)	≥On	≥Off
	IP Address	— — —. — — —. — — —. — — —
	Subnet Mask	— — —. — — —. — — —. — — —
	Default Gateway	— — —. — — —. — — —. — — —
	DNS Auto Configuration (DHCP)	≥On	≥Off
	Primary DNS	— — —. — — —. — — —. — — —
	Secondary DNS	— — —. — — —. — — —. — — —
	Auto Detect Connection Speed	≥On	≥Off
	Connection Speed Setting	≥10BASE Half Duplex		≥10BASE Full Duplex
	This is enabled only when “Auto Detect Connection Speed” is	≥100BASE Half Duplex		≥100BASE Full Duplex
	turned “Off”.
Proxy Server Settings (> 13)
≥Press [OK] to show the following settings.
	Reset to factory preset
	Proxy Address	(The initial setting is blank.)
	Proxy Port Number	(The initial setting is “0”.)

RQT9184

(ENG)

28