Panasonic TH-42PG9W, TH-37PG9W manual Normalization, Menu & Enter

Page 37

Options Adjustments

								Options		2/3
								Button lock		Off
								Remocon User level		Off
								ID select		0
								Remote ID		Off
								Serial ID		Off
Item	Effect						Adjustments
	Off	MENU&ENTER				On
	Off:	All the buttons at the bottom of the main unit can be used.
Button lock	MENU & ENTER:
Button lock		Locks	and		buttons on bottom face of main unit.
		Locks	and		buttons on bottom face of main unit.
		MENU		ENTER/
	On:	Locks all the button on bottom face of main unit.
	Off	User1		User2		User3
	Off:	You can use all of the buttons on the remote control.
Remocon	User1:You can only use				,	, ,	, ,	, ,	buttons on the remote
Remocon	control.
User level	control.
User level

User2:You can only use , , buttons on the remote control.

User3:Locks all the buttons on remote control.

			Sets panel ID number when panel is used in “Remote ID” or “Serial ID”.
ID select			Set value range: 0 - 100
			(Standard value: 0)

Remote ID			Off:	Disables ID remote control functions. You can use normal remote control operations.
Remote ID	Off	On	On:	Enable ID remote control functions.
	Off	On	On:	Enable ID remote control functions.

Serial ID			Sets the panel ID Control.
Serial ID	Off	On	Off:	Disables external control by the ID.
	Off	On	On:	Enables the external control by the ID.
			On:	Enables the external control by the ID.

							Options	3/3
							Slot power	Off
							V. lnstallation	Off
							Rotate	Off
							Serial Slot Select	Slot1

Item	Effect				Adjustments
			Off	Auto	On
			Off:	Power is not transmitted to the slot power.
Slot Power			Auto: Power is transmitted to the slot power only when main power is on.
Slot Power			On:	Power is transmitted to the slot power when main power is on or in the standby state.
			On:
			Note: In some cases, power is transmitted to the slot power when main power is on or in the
			standby state regardless of the slot power setting.
V.Installation	Off	On	This mode is unavailable.
	Off	On
Rotate			Off:	Does not rotate the image.
Rotate	Off	On	On:	Rotates the image 180 degrees.
	Off	On	On:	Rotates the image 180 degrees.

Serial Slot			Slot1	Slot2	Slot3
Serial Slot			Selects the slot which communicates serial.
Select			Note: The setting of an external command can be set only from the ﬁxed serial terminal (see page
			10).

Normalization

When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote ID” adjustments, set all the values “Off” so that all the buttons are enabled again.

Press the VOL button on main unit together with button on the remote control and hold for more than 5 seconds. The “SHIPPING” menu is displayed and the lock is released when it disappears.

37

Image 37

Contents English Operating InstructionsModel No. TH-37PG9W Table of Contents Trademark Credits Important Safety NoticeSetup Safety PrecautionsDo not place any objects on top of the Plasma Display If problems occur during use When using the Plasma DisplayElectric shocks can result if this is not done Clean the power cable regularly to prevent it becoming dustyAccessories Supply AccessoriesCheck that you have the accessories and items shown AC cord fixing ConnectionsAC cord connection see PC Input Terminals connection Signal Names for Mini D-sub 15P ConnectorSerial Terminals connection CommandRS-232C Straight cable Communication parametersExample of input signal source RGB signal R, G, BComponent / RGB in connection Digital TV Set-Top-BoxConnecting the AC cord plug to the Plasma Display Power On / OffConnecting the plug to the Wall Outlet Initial selections Selecting the input signalSelecting the On-Screen Menu Language Swing up the door at PullBasic Controls OFF Timer button Channel AdjustmentDigital Zoom see Press to access Standby on / OFF buttonOn-Screen Menu Displays To Signal screen for Digital see page 33 Press to access From the unit Each adjust ScreenTo Set up Timer selection screen see page 26 To Present Time Setup seeAspect Controls Mode Picture ExplanationNormalisation Adjusting Pos. / SizePress to swap main picture and sub picture Is pressed except button Press to change input signalSub screen Main screen Advanced PIPNormal Picture AdjustmentsDynamic CinemaAdvanced settings Mute Sound AdjustmentDisplay the Operation Guide Digital ZoomSelect the area of the image to be enlarged Select the magnification required for the enlarged displayPresent Time Setup Present Time Setup / Set up TimerDisplay the Set up Timer screen Press to select Set up TimerPower on Time / Power OFF Time Press to setupStart setting Mode selectionScreensaver For preventing after-images Reversal / Scroll selectionReduces screen after-image Setup of Screensaver TimeThis function may be applicable to the non-picture area Side Panel AdjustmentAddition sign Selected Input Reduces power consumptionComposite PB, PR signals Component B, HD, VD signals Setup for Input SignalsComponent / RGB-in select 3D Y/C Filter For Ntsc AV imagesCinema reality / P-NR Colour system / Panasonic AutoSync Setting RGB sync signalFreq. kHz / V-Freq. Hz Displays the H Horizontal / V Vertical frequenciesEffect Adjustments Options AdjustmentsOptions Adjustments Menu & Enter NormalizationShipping condition Plasma Display panel TroubleshootingHorizontal Vertical Component COMPONENT/RGB/PC input signalsFrequency kHz Frequency Hz Component TH-37PG9W TH-42PG9W SpecificationsMemo Memo Customer’s Record