Panasonic TH-42PG9W, TH-37PG9W manual Colour system / Panasonic Auto, Cinema reality / P-NR

Setup for Input Signals

Colour system / Panasonic Auto

Select Signal from the “Setup” menu during AV(S Video) input signal. (“Signal [AV]” menu is displayed.)

Press to select the “Colour system” or “Panasonic Auto”.

Press to select each functions.

Setup	1/2
Signal
Component/RGB-in select
	RGB
Input label	PC
Power save	Off
Standby save	Off
Power management	Off
Auto power off	Off
OSD Language	English (UK)

If the picture image becomes unstable:

With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become unstable. Should this occur, set the system to match the format of the input signal.

Press ACTION () button

Signal	[ AV ]
3D Y/C Filter (NTSC)	On
Colour system	Auto
Cinema reality	Off
Panasonic Auto (4 : 3)	4 : 3
P-NR	Off

Mode			Function
Colour system	Set the colour system to match the input signal. If set to “Auto”, the colour system is
	determined automatically.
	Auto	PAL	SECAM	M.NTSC	NTSC
Panasonic Auto	Set to “4 : 3” to view 4:3 images in an unchanged format when Panasonic Auto is selected.
(4 : 3)	If you would like to view 4:3 images in Just format, set to “Just”.

Note:

Panasonic Auto does not function when TY-FB9BD (BNC Dual Video Terminal Board (option)) is used.

Cinema reality / P-NR

Cinema reality:
When on, the display attempts to reproduce a more natural interpretation of sources
such as movie pictures, which are recorded at 24 frames per second.				Setup		1/2
If the picture is not stable, turn the setting to off.
Note:				Signal
			Component/RGB-in select
When On, this setting only affects the following signal input:
						RGB
• NTSC / PAL signal input during “AV(S Video)” input signal.			Input label			PC
• 525i(480i) 625i(575i), 1125(1080) / 60i signal input during “Component” input			Power save			Off
signal.			Standby save			Off
			Power management			Off
P-NR:			Auto power off			Off
			OSD Language			English (UK)
Automatically reduces unwanted picture noise.
Note:				Press ACTION ( ) button
P-NR cannot be adjusted while a PC signal is being applied.
1	Press to select Cinema	Signal	[ AV ]	Signal		[ RGB ]
		Colour system	Auto	Cinema reality		Off
	reality or P-NR.
		3D Y/C Filter (NTSC)	On	Sync		Auto
	Press to set On / Off.	Cinema reality	Off	P-NR		Off
		Panasonic Auto (4 : 3)	4 : 3	H-Freq.	33.8	kHz
		P-NR	Off	V-Freq.	60.0	Hz

		Signal	[ Component ]
2		Cinema reality	Off
		P-NR	Off
	Press to exit from adjust mode.

Signal		[ Digital ]
Cinema reality		Off
P-NR		Off
H-Freq.	33.8	kHz
V-Freq.	60.0	Hz

33