Panasonic TH-37PG9W, TH-42PG9W manual Sync, Freq. kHz / V-Freq. Hz, Setting RGB sync signal

Page 34

Setup for Input Signals

Sync

Select Signal from the “Setup” menu during RGB input signal.

1	Press to adjust.

Setup	1/2
Signal
Component/RGB-in select
	RGB
Input label	PC
Power save	Off
Standby save	Off
Power management	Off
Auto power off	Off
OSD Language	English (UK)

2

Press to exit from adjust mode.

Setting RGB sync signal:

Confirm that the input is set to RGB input (this setting is valid only for RGB input signal).

Auto: The H and V sync or synchronized signal are automatically selected. If both input, it is selected the H and V sync.

on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.

VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.

Press ACTION () button

	Signal		[ RGB ]

	Sync		Auto

	Cinema reality		Off

	P-NR		Off
	H-Freq.	33.8	kHz
	V-Freq.	60.0	Hz

SyncAuto

Sync

on G

SyncVBS

H-Freq. (kHz) / V-Freq. (Hz)

Displays the H (Horizontal) / V (Vertical) frequencies.

This display is valid only for RGB / PC and Digital input signal.

Display range:
Horizontal	15	- 110 kHz
Vertical	48	- 120 Hz

H-Freq. 33.8 kHz V-Freq. 60.0 Hz

34

Image 34

Contents English Operating InstructionsModel No. TH-37PG9W Table of Contents Important Safety Notice Trademark CreditsSetup Safety PrecautionsDo not place any objects on top of the Plasma Display When using the Plasma Display If problems occur during useClean the power cable regularly to prevent it becoming dusty Electric shocks can result if this is not doneAccessories Supply AccessoriesCheck that you have the accessories and items shown AC cord fixing ConnectionsAC cord connection see Signal Names for Mini D-sub 15P Connector PC Input Terminals connectionRS-232C Straight cable CommandSerial Terminals connection Communication parametersComponent / RGB in connection RGB signal R, G, BExample of input signal source Digital TV Set-Top-BoxConnecting the AC cord plug to the Plasma Display Power On / OffConnecting the plug to the Wall Outlet Selecting the On-Screen Menu Language Selecting the input signalInitial selections Swing up the door at PullBasic Controls Digital Zoom see Press to access Channel AdjustmentOFF Timer button Standby on / OFF buttonOn-Screen Menu Displays To Set up Timer selection screen see page 26 Press to access From the unit Each adjust ScreenTo Signal screen for Digital see page 33 To Present Time Setup seeMode Picture Explanation Aspect ControlsAdjusting Pos. / Size NormalisationIs pressed except button Press to change input signal Press to swap main picture and sub pictureAdvanced PIP Sub screen Main screenDynamic Picture AdjustmentsNormal CinemaAdvanced settings Sound Adjustment MuteSelect the area of the image to be enlarged Digital ZoomDisplay the Operation Guide Select the magnification required for the enlarged displayPresent Time Setup / Set up Timer Present Time SetupPower on Time / Power OFF Time Set up TimerDisplay the Set up Timer screen Press to select Press to setupScreensaver For preventing after-images Mode selectionStart setting Reversal / Scroll selectionSetup of Screensaver Time Reduces screen after-imageSide Panel Adjustment This function may be applicable to the non-picture areaAddition sign Selected Input Reduces power consumptionComposite Component / RGB-in select Setup for Input SignalsPB, PR signals Component B, HD, VD signals 3D Y/C Filter For Ntsc AV imagesColour system / Panasonic Auto Cinema reality / P-NRFreq. kHz / V-Freq. Hz Setting RGB sync signalSync Displays the H Horizontal / V Vertical frequenciesOptions Adjustments Effect AdjustmentsOptions Adjustments Normalization Menu & EnterShipping condition Troubleshooting Plasma Display panelHorizontal Vertical Component COMPONENT/RGB/PC input signalsFrequency kHz Frequency Hz Component Specifications TH-37PG9W TH-42PG9WMemo Memo Customer’s Record