Panasonic AV-HS300 manual Basic operations, Transitions, Selecting the bus mode

Page 12

2. Basic operations

2-1. Transitions

2-1-1. Selecting the bus

Press the crosspoint switches to select the material which will be targeted for the background transition. By pressing these switches, the signals are selected, and the indicators of the selected switches light. The color in which the switch indicators light differs depending on the operation status.

Lighting in red: When the selected input signals are output to PGM.

Lighting in green: When the selected input signals are not output to PGM.

For details on how to select the key source bus and key fill bus, refer to “2-3-1” and “2-3-4”. For details on how to select the AUX bus, refer to “3-2-2”.

2-1-2. Selecting the bus mode

Select the A/B bus system or flip-flop system (PGM/PST system) from the setting menu.

Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUP menu.  Turn [F1] to display the BUS menu.

 Turn [F2], and select the A/B or P/P (flip-flop system) using the MODE item.

ＢＵＳ

１１／１４

ＭＯＤＥ

Ａ／Ｂ

Ｐ／Ｐ

With the flip-flop (P/P) system, the PGM/A bus selected signals are always output as PGM images, and the PST/B bus selected signals are always output as PVW (PST) images.

System	Video output	Before transition	During transition	After transition completion
A/B	PGM	PGM/A	PGM/A, PST/B	PST/B
	PVW (PST)	PST/B	PST/B	PGM/A

* With an A  B transition

System

Video output

Before transition

During transition

After transition completion

Flip-flop P/P

PGM

PGM/A

PGM/A, PST/B

PGM/A

PVW (PST)

PST/B

PST/B

PST/B

12

Image 12

Contents Operating Instructions Safety precautions FCC NoteImportant Safety Instructions Contents Features Description Power indicator Power  Power switch Alarm indicator Alarm Parts and their functions PGM/A bus crosspoint switches PGM/A 1 to  PST/B bus crosspoint switches PST/B 1 to Source selector switches Source SELECT/AUX, KEY-S, KEY-F Crosspoint area Wipe pattern selector switches Wipe Pattern / Func Wipe direction selector switch N N/R R Func switch  Freeze status indicator LEDTransition area LCD menu area  Fader lever Bus tally LEDs  Rotary encoders F1 to F4 SDI signal input connectors Digital Inputs 1 to Rear panel connections area             Selecting the bus mode Basic operationsTransitions Selecting the busSelecting the transition mode Manual transition using the fader leverAuto transition Wipe Selecting the wipe patternSelecting the wipe direction Wipe decorations border, soft effectSetting the border color Adjusting the border colorＵＳＲ１ＨＵＥＳＡＴＬＵＭSelecting the key source signals KeySelecting the key source How key combination worksSetting the key Key adjustmentsSelecting the key fill signals Selecting key fillSelecting the fill color Adjusting the fill color Setting the key edgeKey decorations ＵＳＲ１ＨＵＥAdjusting the edge color Adjusting the color background Color backgroundFreezing the input signals ＦＲＺＳＩＧＩＮ１ＩＮ２ＩＮ３ＩＮ４ＩＮ５ＤＶＩFrame memory ＦｍｅｍＳＩＧＡＵＸＭＥＭＳｔｏｒＥｘｅｃPreset memory Ｐｓｍｅｍ１／３ＭｏｄｅＳｔｏｒＲｅｃｌＣＬＲＮＯ．Transition area User colorClear This is used to clear the preset memory content Ｐｓｍｅｍ２／３ＸＰＴＤｓｂｌＥｎｂｌSetup Setting the input signalsSetting the input signals in 1 to Setting the input signal frame synchronizerSetting the DVI input signals ＳＩＧＳｘｇａＸＧＡＳｃａｌＮｏｒｍＦｕｌｌＭｏｄｅＤＩＧＡｎｌｇSelecting the size Selecting the scaling methodSelecting the signal system 720 4801024 768 1280 1024Setting the output signals Types of output signalsSelecting the AUX signals Signal format Input signals Selecting the video formatDisplay Setting the crosspoints Assigning signals to the crosspointsSetting the crosspoint switching Switch Signal DescriptionＸｐｔｓｗＴｉｍｇＡＮＹ Setting the sync signals ＲＥＦＳｙｎｃＢｂａｄＴＲＩAdjusting the output signal phase ＳＹＳPhase adjustment setup Network settings Setting the IP addressSetting the subnet mask ＭａｓｋSetting the gateway Setting the MAC addressＭＡＣ Other settings Setting the ancillary dataBB signal setup level LCD backlightStatus displays InitializationＡＬＭＦＡＮＰｏｗｒＯＰＴＡｎｌｇＶＥＲＩｎｉｔＥｘｅｃＩＮＩＴ？ＹＥＳSetting menu table Type INV PVW MEM Psmem IN1-5 Setup SYS Specifications Image transmission functionsConnections How to install the program Setting the IP address StartupExit OperationTransmitting images to the unit Transmitting images from the unitRS-422 connector GPI connectorTally connector External interfacesConnections AV-HS300Example where the HD analog input option is used Appearance Unit mmSpecifications and standard accessories SpecificationsStandard accessories Optional accessoriesAppendix glossary Preset Bus Preset MemoryGenlock General Purpose InterfaceSerial Digital Interface Self KeyTally TransitionPage Page Panasonic Broadcast & Television Systems Company