Panasonic AV-HS300 Preset memory, Ｐｓｍｅｍ １／３ Ｍｏｄｅ Ｓｔｏｒ Ｒｅｃｌ ＣＬＲ ＮＯ．, Transition area, User color

2. Basic operations

2-7. Preset memory

Up to 10 panel settings can be stored in this memory (flash memory).

The table below lists the settings which are stored.

<Table of stored preset memory>

Item	Description of setting		Initial value (factory default)
Crosspoint	A bus	1
	B bus	2
	KEY-S	4
	KEY-F	5
	AUX bus	1
	Color background	WHITE
Wipe	Wipe pattern	4	(center)
	Border width	4	(TBD)
	Soft effect width	4	(TBD)
	Border color	YLW
Transition area	BKGD/KEY selection	BKGD
	MIX/WIPE selection	MIX
	Auto transition time (BKGD)	60F
	Auto transition time (KEY)	60F
Key	Key type (TYPE)	LIN
	Key adjustment (ADJ)	GAIN: 100 (TBD)
		CLIP: 50 (TBD)
		DENS: 100 (TBD)
	Inversion ON/OFF	OFF
	Fill color	GRN (TBD)
	Edge color	YLW (TBD)
	Edge ON/OFF (TYPE)	OFF
	Edge width	4	(TBD)
User color	User color 1 (HUE, SAT, LUM)	0, 0, 100 (TBD)
	User color 2 (HUE, SAT, LUM)	355, 100, 7 (TBD)
	User color 3 (HUE, SAT, LUM)	50, 100, 29 (TBD)
	User color 4 (HUE, SAT, LUM)	0, 0, 0 (TBD)

STORE: This is used to store the panel settings in the preset memory.

Press the [FUNC] switch to light its indicator, and then press the [MEM] switch to display the MEM menu. The PSMEM (1/3) menu appears first.

Turn [F2], select “STOR” using the MODE item, turn [F3], and set the preset memory number using the NO. item.

Press the [F4] switch (EXEC) to store the settings.

ＰＳＭＥＭ １／３

ＭＯＤＥ

ＳＴＯＲ

ＲＥＣＬ

ＣＬＲ

ＮＯ．

＊１０

１－１０

ＥＸＥＣ

An asterisk ( ) appears at the left of the number when data has been saved in the preset memory.

24