Panasonic AV-HS300 manual IN1-5

4. Setting menu table

Menu	Submenu		Parameter 1	Parameter 2	Parameter 3
	Turn F1 to select.		Turn F2 to select.	Turn F3 to select.	Turn F4 to select.
SETUP	IN1–5	Parameter	SIG	MODE	—
	1/14	Setting range	IN1 to 5	SDI	—
				ANLG
		Default value	IN1 to 5	SDI	—
	DVIIN	Parameter	SIZE	SCAL	MODE
	2/14	Setting range	SXGA	NORM	DIG
			XGA	FULL	ANLG
		Default value	SXGA	NORM	DIG
	FS	Parameter	SIG	FS	—
	3/14	Setting range	IN1 to 5	ON	—
				OFF
		Default value	IN1 to 5	ON	—
	FORMT	Parameter	MODE	—	—
	4/14	Setting range	1080/59i	—	EXEC ()
			1080/50i
			720/59p
			720/50p
			480/59i
			576/50i
		Default value	1080/59i	—	—
	REF	Parameter	SYNC	—	—
	5/14	Setting range	BBST	—	EXEC ()
			BBAD
			TRI
			INT
		Default value	BBST	—	—
	OUPHS	Parameter	SYS	H	V
	6/14	Setting range	0H	–1369 to 1369?	–100 to 100?
			1H
		Default value	0H
				0	0
	IP	Setting range	Cursor movement	0 to 255
	7/14	Default value	192.168.0.1
	MASK	Setting range	Cursor movement	0 to 255
	8/14	Default value	255.255.255.0
	GW	Setting range	Cursor movement	0 to 255
	9/14	Default value	0.0.0.0
	MAC	Display only	12-digit address display
	10/14	Default value	—
	BUS	Parameter	TYPE	—	—
	11/14	Setting range	A/B	—	—
			P/P (PGM/PST)
		Default value	P/P	—	—

43