Panasonic AV-HS300 manual Selecting the transition mode, Manual transition using the fader lever

Page 13

2. Basic operations

2-1-3. Selecting the transition mode

Use the [BKGD] and [KEY] switches in the transition area to select the bus signals for which the transition is to be executed. If the switches have been pressed at the same time, both switches are selected. The indicator of a selected switch lights.

The switches cannot be selected while a transition is being executed or suspended.

Use the [MIX] and [WIPE] switches in the transition area to select the background transition mode. Select one of these switches, and the indicator of the selected switch lights in amber.

MIX always applies to key transitions whichever switch has been selected.

2-1-4. Manual transition (using the fader lever)

Operate the fader lever to execute transitions manually.

If the fader lever has been operated during auto transition, auto transition will be switched to manual operation as soon as the fader position overtakes the amount of the transition being executed.

The bus tally LEDs on the left of the fader lever indicate the program bus output status.

Top LED only lights:

PGM, A bus output

Top and bottom LEDs light: Transition underway

Bottom LED only lights:

B bus output

2-1-5. Auto transition

When the [AUTO] switch is pressed, the transition is executed automatically using the transition time which has been set.

If the [AUTO] switch is pressed while the fader lever is at a midway position, the remaining transition will be executed automatically using the transition time which has been set.

The auto transition time is set using the menu. It can be set separately for BKGD and KEY.

Press the [FUNC] switch to light its indicator, and press the [TIME] switch to display the TIME menu.  Turn [F1] to display the BKGD or KEY menu.

 Turn [F4] to select the display unit using the UNIT item.

 When frames (F) have been selected as the unit, turn [F3] to set the transition time.

When seconds (SEC) have been selected as the unit, turn [F2] to set the second units or [F3] to set the frame units.

(With BKGD and seconds (SEC) as the display unit)

ＢＫＧＤ

１／２

ＴＩＭＥ

１６ｓ

３９ｆ

ＵＮＩＴ

ＳＥＣ

(With KEY and frames (F) as the display unit)

ＫＥＹ

２／２

ＴＩＭＥ

９９９ｆ

ＵＮＩＴ

Ｆ

Any time from 0 to 999f can be set. The time which can be set when seconds are used as the display unit differs depending on the video format.

59i: max. 33s09f, 59p: max. 16s18f

50i: max. 39s24f, 50p: max. 19s49f

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operating Instructions FCC Note Safety precautionsImportant Safety Instructions Contents Description Features Power switch  Power indicator Power Alarm indicator Alarm Parts and their functions PST/B bus crosspoint switches PST/B 1 to  PGM/A bus crosspoint switches PGM/A 1 to Source selector switches Source SELECT/AUX, KEY-S, KEY-F Crosspoint areaWipe direction selector switch N N/R R  Wipe pattern selector switches Wipe Pattern / Func Func switch  Freeze status indicator LEDTransition area  Fader lever LCD menu area Bus tally LEDs  Rotary encoders F1 to F4Rear panel connections area  SDI signal input connectors Digital Inputs 1 to             Basic operations Selecting the bus modeTransitions Selecting the busManual transition using the fader lever Selecting the transition modeAuto transition Selecting the wipe pattern WipeSelecting the wipe direction Wipe decorations border, soft effectAdjusting the border color Setting the border colorＵＳＲ１ ＨＵＥ ＳＡＴ ＬＵＭKey Selecting the key source signalsSelecting the key source How key combination worksKey adjustments Setting the keySelecting key fill Selecting the key fill signalsSelecting the fill color Setting the key edge Adjusting the fill colorKey decorations ＵＳＲ１ ＨＵＥAdjusting the edge color Color background Adjusting the color backgroundＦＲＺ ＳＩＧ ＩＮ１ ＩＮ２ ＩＮ３ ＩＮ４ ＩＮ５ ＤＶＩ Freezing the input signalsＦｍｅｍ ＳＩＧ ＡＵＸ ＭＥＭ Ｓｔｏｒ Ｅｘｅｃ Frame memoryＰｓｍｅｍ １／３ Ｍｏｄｅ Ｓｔｏｒ Ｒｅｃｌ ＣＬＲ ＮＯ． Preset memoryTransition area User colorＰｓｍｅｍ ２／３ ＸＰＴ Ｄｓｂｌ Ｅｎｂｌ Clear This is used to clear the preset memory contentSetting the input signals SetupSetting the input signals in 1 to Setting the input signal frame synchronizerＳＩＧ Ｓｘｇａ ＸＧＡ Ｓｃａｌ Ｎｏｒｍ Ｆｕｌｌ Ｍｏｄｅ ＤＩＧ Ａｎｌｇ Setting the DVI input signalsSelecting the size Selecting the scaling method720 480 Selecting the signal system1024 768 1280 1024Types of output signals Setting the output signalsSelecting the AUX signals Selecting the video format Signal format Input signalsDisplay Assigning signals to the crosspoints Setting the crosspointsSwitch Signal Description Setting the crosspoint switchingＸｐｔｓｗ Ｔｉｍｇ ＡＮＹ ＲＥＦ Ｓｙｎｃ Setting the sync signalsＢｂａｄ ＴＲＩＳＹＳ Adjusting the output signal phasePhase adjustment setup Setting the IP address Network settingsSetting the subnet mask ＭａｓｋSetting the MAC address Setting the gatewayＭＡＣ Setting the ancillary data Other settingsBB signal setup level LCD backlightInitialization Status displaysＡＬＭ ＦＡＮ Ｐｏｗｒ ＯＰＴ Ａｎｌｇ ＶＥＲ Ｉｎｉｔ Ｅｘｅｃ ＩＮＩＴ？ ＹＥＳSetting menu table Type INV PVW MEM Psmem IN1-5 Setup SYS Image transmission functions SpecificationsConnections How to install the program Startup Setting the IP addressExit OperationTransmitting images from the unit Transmitting images to the unitGPI connector RS-422 connectorTally connector External interfacesAV-HS300 ConnectionsExample where the HD analog input option is used Unit mm AppearanceSpecifications Specifications and standard accessoriesOptional accessories Standard accessoriesAppendix glossary Preset Memory Preset BusGenlock General Purpose InterfaceSelf Key Serial Digital InterfaceTally TransitionPage Page Panasonic Broadcast & Television Systems Company
Top Page Image Contents