Panasonic AV-HS300 Wipe area,  Wipe pattern selector switches Wipe Pattern / Func,  Func switch

Page 8

1. Parts and their functions

1-3. Wipe area

Wipe pattern selector switches [WIPE PATTERN / FUNC]

These are used to select the wipe patterns. Each switch is used to select one of the nine wipe patterns.

The indicator of the switch for the selected pattern lights (in amber).

When the [FUNC] switch () has been pressed and its indicator is lighted, the function setting menu is selected, and the indicator lights up green.

Wipe direction selector switch [N N/R R]

This is used to select the wipe direction.  See 2-2-2

[N]: For setting the wipe direction to the normal direction.

[N/R]: To switch the wipe direction between normal and reverse when the execution of the transition has been completed.

[R]: For setting the wipe direction to the reverse direction.

[FUNC] switch

When this switch is pressed, its indicator lights up green. If a wipe pattern selector switch is pressed while its indicator is lighted, the wipe pattern selector switch lights up green, and the setting menu of the function indicated underneath the switch appears on the LCD display.

[TIME]:

For setting the auto transition time.

 See 2-1-5

[WIPE]:

For setting the wipe border and soft effect.

 See 2-2-3

[CBGD]:

For setting the color background.

 See 2-4

[KEY]:

For setting the key.

 See 2-3

[EDGE]:

For setting the key edge.

 See 2-3-5

[FRZ]:

For displaying the freeze status display and setting freezing.

 See 2-5

[MEM]:

For setting the preset memory or frame memory.

 See 2-6, 2-7

[XPT]:

For displaying and setting the crosspoint assignment.

 See 3-4

[SETUP]: For performing the system settings.

 See 3

Freeze status indicator LED

When this LED is lighted, it means that one of the input signals is frozen.

When the [FUNC] switch () is pressed and its indicator is lighted and then the [FRZ] switch is pressed, the

freeze status is indicated for each input. (An asterisk () appears above the name of a frozen crosspoint.) Bear in mind that since the signals are frozen while the indicator is lighted, the unit’s output will remain unchanged even if the input images change.

(When crosspoints 3 and 5 are frozen)

ＦＲＺ

１／２

ＦＲＺ：

＊ ＊

ＸＰＴ：

１２３４５６７

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Operating Instructions Safety precautions FCC NoteImportant Safety Instructions Contents Features Description Power indicator Power  Power switch Alarm indicator Alarm Parts and their functions PGM/A bus crosspoint switches PGM/A 1 to  PST/B bus crosspoint switches PST/B 1 to Source selector switches Source SELECT/AUX, KEY-S, KEY-F Crosspoint area Wipe pattern selector switches Wipe Pattern / Func Wipe direction selector switch N N/R R Func switch  Freeze status indicator LEDTransition area LCD menu area  Fader lever Bus tally LEDs  Rotary encoders F1 to F4              SDI signal input connectors Digital Inputs 1 toRear panel connections area Selecting the bus mode Basic operationsTransitions Selecting the busAuto transition Selecting the transition modeManual transition using the fader lever Wipe Selecting the wipe patternSelecting the wipe direction Wipe decorations border, soft effectSetting the border color Adjusting the border colorＵＳＲ１ ＨＵＥ ＳＡＴ ＬＵＭSelecting the key source signals KeySelecting the key source How key combination worksSetting the key Key adjustmentsSelecting the fill color Selecting the key fill signalsSelecting key fill Adjusting the fill color Setting the key edgeKey decorations ＵＳＲ１ ＨＵＥAdjusting the edge color Adjusting the color background Color backgroundFreezing the input signals ＦＲＺ ＳＩＧ ＩＮ１ ＩＮ２ ＩＮ３ ＩＮ４ ＩＮ５ ＤＶＩFrame memory Ｆｍｅｍ ＳＩＧ ＡＵＸ ＭＥＭ Ｓｔｏｒ ＥｘｅｃPreset memory Ｐｓｍｅｍ １／３ Ｍｏｄｅ Ｓｔｏｒ Ｒｅｃｌ ＣＬＲ ＮＯ．Transition area User colorClear This is used to clear the preset memory content Ｐｓｍｅｍ ２／３ ＸＰＴ Ｄｓｂｌ ＥｎｂｌSetup Setting the input signalsSetting the input signals in 1 to Setting the input signal frame synchronizerSetting the DVI input signals ＳＩＧ Ｓｘｇａ ＸＧＡ Ｓｃａｌ Ｎｏｒｍ Ｆｕｌｌ Ｍｏｄｅ ＤＩＧ ＡｎｌｇSelecting the size Selecting the scaling methodSelecting the signal system 720 4801024 768 1280 1024Selecting the AUX signals Setting the output signalsTypes of output signals Display Signal format Input signalsSelecting the video format Setting the crosspoints Assigning signals to the crosspointsＸｐｔｓｗ Ｔｉｍｇ ＡＮＹ Setting the crosspoint switchingSwitch Signal Description Setting the sync signals ＲＥＦ ＳｙｎｃＢｂａｄ ＴＲＩAdjusting the output signal phase ＳＹＳPhase adjustment setup Network settings Setting the IP addressSetting the subnet mask ＭａｓｋＭＡＣ Setting the gatewaySetting the MAC address Other settings Setting the ancillary dataBB signal setup level LCD backlightStatus displays InitializationＡＬＭ ＦＡＮ Ｐｏｗｒ ＯＰＴ Ａｎｌｇ ＶＥＲ Ｉｎｉｔ Ｅｘｅｃ ＩＮＩＴ？ ＹＥＳSetting menu table Type INV PVW MEM Psmem IN1-5 Setup SYS Connections SpecificationsImage transmission functions How to install the program Setting the IP address StartupExit OperationTransmitting images to the unit Transmitting images from the unitRS-422 connector GPI connectorTally connector External interfacesConnections AV-HS300Example where the HD analog input option is used Appearance Unit mmSpecifications and standard accessories SpecificationsStandard accessories Optional accessoriesAppendix glossary Preset Bus Preset MemoryGenlock General Purpose InterfaceSerial Digital Interface Self KeyTally TransitionPage Page Panasonic Broadcast & Television Systems Company
Top Page Image Contents