Panasonic AV-HS300 manual External interfaces, RS-422 connector, GPI connector, Tally connector

Page 49

6. External interfaces

This unit comes with RS-422, GPI and tally connectors to serve as external interfaces.

6-1. RS-422 connector

This enables the unit to be controlled by an external device. Use it with the settings below.

Baud rate: 38400 bps

Parity: ODD

Stop bit: 1 bit

Pin assignment

� � � � �

� � � �

Pin No.	Signal name	Description of signal
1	FRAME GROUND	Frame ground
2	RXD –	Receive data (–)
3	TXD +	Send data (+)
4	GROUND	Ground
5	NC	Not used
6	GROUND	Ground
7	RXD +	Receive data (+)
8	TXD –	Send data (–)
9	FRAME GROUND	Frame ground

6-2. GPI connector

This enables auto take operations to be executed by an external device.

Auto transitions are executed at the fall of the GPI signals.

6-3. Tally connector

The tally connector comes with tally output, output enable, power supply or fan alarm output pins.

The output signals from the tally output pins are for lighting the tally lamps, and these outputs are open collector outputs.

		� �	�	�	�
		�	�	�	�
Pin assignment

Pin No.	Signal name	Input/output				Description of signal
1	IN1	Open collector output				Tally output of input video 1
2	IN2	Open collector output				Tally output of input video 2
3	IN3	Open collector output				Tally output of input video 3
4	IN4	Open collector output				Tally output of input video 4
5	IN5	Open collector output				Tally output of input video 5
6	IN6	Open collector output				Tally output of input video 6
7	ENABLE	Input				Enable signal of tally output
						Open: Output; GND: no output
8	ALARM	Open collector output				Fan alarm or power supply alarm output
9	GROUND	GROUND				Ground

49

Image 49

Contents Operating Instructions FCC Note Safety precautionsImportant Safety Instructions Contents Description Features Power switch  Power indicator Power Alarm indicator Alarm Parts and their functions PST/B bus crosspoint switches PST/B 1 to  PGM/A bus crosspoint switches PGM/A 1 to Source selector switches Source SELECT/AUX, KEY-S, KEY-F Crosspoint areaWipe direction selector switch N N/R R  Wipe pattern selector switches Wipe Pattern / Func Func switch  Freeze status indicator LEDTransition area  Fader lever LCD menu area Bus tally LEDs  Rotary encoders F1 to F4Rear panel connections area  SDI signal input connectors Digital Inputs 1 to             Basic operations Selecting the bus modeTransitions Selecting the busManual transition using the fader lever Selecting the transition modeAuto transition Selecting the wipe pattern WipeSelecting the wipe direction Wipe decorations border, soft effectAdjusting the border color Setting the border colorＵＳＲ１ＨＵＥＳＡＴＬＵＭKey Selecting the key source signalsSelecting the key source How key combination worksKey adjustments Setting the keySelecting key fill Selecting the key fill signalsSelecting the fill color Setting the key edge Adjusting the fill colorKey decorations ＵＳＲ１ＨＵＥAdjusting the edge color Color background Adjusting the color backgroundＦＲＺＳＩＧＩＮ１ＩＮ２ＩＮ３ＩＮ４ＩＮ５ＤＶＩ Freezing the input signalsＦｍｅｍＳＩＧＡＵＸＭＥＭＳｔｏｒＥｘｅｃ Frame memoryＰｓｍｅｍ１／３ＭｏｄｅＳｔｏｒＲｅｃｌＣＬＲＮＯ． Preset memoryTransition area User colorＰｓｍｅｍ２／３ＸＰＴＤｓｂｌＥｎｂｌ Clear This is used to clear the preset memory contentSetting the input signals SetupSetting the input signals in 1 to Setting the input signal frame synchronizerＳＩＧＳｘｇａＸＧＡＳｃａｌＮｏｒｍＦｕｌｌＭｏｄｅＤＩＧＡｎｌｇ Setting the DVI input signalsSelecting the size Selecting the scaling method720 480 Selecting the signal system1024 768 1280 1024Types of output signals Setting the output signalsSelecting the AUX signals Selecting the video format Signal format Input signalsDisplay Assigning signals to the crosspoints Setting the crosspointsSwitch Signal Description Setting the crosspoint switchingＸｐｔｓｗＴｉｍｇＡＮＹＲＥＦＳｙｎｃ Setting the sync signalsＢｂａｄＴＲＩＳＹＳ Adjusting the output signal phasePhase adjustment setup Setting the IP address Network settingsSetting the subnet mask ＭａｓｋSetting the MAC address Setting the gatewayＭＡＣ Setting the ancillary data Other settingsBB signal setup level LCD backlightInitialization Status displaysＡＬＭＦＡＮＰｏｗｒＯＰＴＡｎｌｇＶＥＲＩｎｉｔＥｘｅｃＩＮＩＴ？ＹＥＳSetting menu table Type INV PVW MEM Psmem IN1-5 Setup SYS Image transmission functions SpecificationsConnections How to install the program Startup Setting the IP addressExit OperationTransmitting images from the unit Transmitting images to the unitGPI connector RS-422 connectorTally connector External interfacesAV-HS300 ConnectionsExample where the HD analog input option is used Unit mm AppearanceSpecifications Specifications and standard accessoriesOptional accessories Standard accessoriesAppendix glossary Preset Memory Preset BusGenlock General Purpose InterfaceSelf Key Serial Digital InterfaceTally TransitionPage Page Panasonic Broadcast & Television Systems Company