Panasonic AV-HS300 Network settings, Ｍａｓｋ, Setting the IP address, Setting the subnet mask

Page 36

3. Setup

3-7. Network settings

Set up the network for transmitting image files by Ethernet. For details on image transmission method, refer to “5. Image transmission functions”.

The network setup is: IP address: 192.168.0.10, subnet mask: 255.255.255.0 and gateway: 0.0.0.0 (unused). When using the host computer with settings matching the network setup, it is not necessary to setup via the menu.

For the setting to take effect, the system must be rebooted. Turn the system’s power off and then back on.

Setting the IP address

Press the [FUNC] switch to light its indicator, and then press the [SETUP] switch to display the SETUP menu.

Turn [F1] to display the IP menu.

Turn [F2] to select the setting location. An asterisk () appears at the setting location.

Turn [F3] to set the number, and press the [F3] switch to enter the setting. If the setting is not entered even though it has been changed, “ ! ” appears above the setting location, and when the setting location is moved by turning [F2], the value prior to the change is restored.

ＩＰ

７／１４

！＊

１９２．１６８．０．１０

Setting the subnet mask

On the SETUP menu, turn [F1] to display the MASK menu.

Turn [F2] to select the setting location. An asterisk () appears at the setting location.

Turn [F3] to set the number, and press the [F3] switch to enter the setting. If the setting is not entered even though it has been changed, “ ! ” appears above the setting location, and when the setting location is moved by turning [F2], the value prior to the change is restored.

ＭＡＳＫ

８／１４

＊

２５５．２５５．２５５．０

36

Image 36

Contents Operating Instructions Safety precautions FCC NoteImportant Safety Instructions Contents Features Description Power indicator Power  Power switch Alarm indicator Alarm Parts and their functions PGM/A bus crosspoint switches PGM/A 1 to  PST/B bus crosspoint switches PST/B 1 to Source selector switches Source SELECT/AUX, KEY-S, KEY-F Crosspoint area Wipe pattern selector switches Wipe Pattern / Func Wipe direction selector switch N N/R R Func switch  Freeze status indicator LEDTransition area LCD menu area  Fader lever Bus tally LEDs  Rotary encoders F1 to F4 SDI signal input connectors Digital Inputs 1 to Rear panel connections area             Selecting the bus mode Basic operationsTransitions Selecting the busSelecting the transition mode Manual transition using the fader leverAuto transition Wipe Selecting the wipe patternSelecting the wipe direction Wipe decorations border, soft effectSetting the border color Adjusting the border colorＵＳＲ１ＨＵＥＳＡＴＬＵＭSelecting the key source signals KeySelecting the key source How key combination worksSetting the key Key adjustmentsSelecting the key fill signals Selecting key fillSelecting the fill color Adjusting the fill color Setting the key edgeKey decorations ＵＳＲ１ＨＵＥAdjusting the edge color Adjusting the color background Color backgroundFreezing the input signals ＦＲＺＳＩＧＩＮ１ＩＮ２ＩＮ３ＩＮ４ＩＮ５ＤＶＩFrame memory ＦｍｅｍＳＩＧＡＵＸＭＥＭＳｔｏｒＥｘｅｃPreset memory Ｐｓｍｅｍ１／３ＭｏｄｅＳｔｏｒＲｅｃｌＣＬＲＮＯ．Transition area User colorClear This is used to clear the preset memory content Ｐｓｍｅｍ２／３ＸＰＴＤｓｂｌＥｎｂｌSetup Setting the input signalsSetting the input signals in 1 to Setting the input signal frame synchronizerSetting the DVI input signals ＳＩＧＳｘｇａＸＧＡＳｃａｌＮｏｒｍＦｕｌｌＭｏｄｅＤＩＧＡｎｌｇSelecting the size Selecting the scaling methodSelecting the signal system 720 4801024 768 1280 1024Setting the output signals Types of output signalsSelecting the AUX signals Signal format Input signals Selecting the video formatDisplay Setting the crosspoints Assigning signals to the crosspointsSetting the crosspoint switching Switch Signal DescriptionＸｐｔｓｗＴｉｍｇＡＮＹ Setting the sync signals ＲＥＦＳｙｎｃＢｂａｄＴＲＩAdjusting the output signal phase ＳＹＳPhase adjustment setup Network settings Setting the IP addressSetting the subnet mask ＭａｓｋSetting the gateway Setting the MAC addressＭＡＣ Other settings Setting the ancillary dataBB signal setup level LCD backlightStatus displays InitializationＡＬＭＦＡＮＰｏｗｒＯＰＴＡｎｌｇＶＥＲＩｎｉｔＥｘｅｃＩＮＩＴ？ＹＥＳSetting menu table Type INV PVW MEM Psmem IN1-5 Setup SYS Specifications Image transmission functionsConnections How to install the program Setting the IP address StartupExit OperationTransmitting images to the unit Transmitting images from the unitRS-422 connector GPI connectorTally connector External interfacesConnections AV-HS300Example where the HD analog input option is used Appearance Unit mmSpecifications and standard accessories SpecificationsStandard accessories Optional accessoriesAppendix glossary Preset Bus Preset MemoryGenlock General Purpose InterfaceSerial Digital Interface Self KeyTally TransitionPage Page Panasonic Broadcast & Television Systems Company