Panasonic TQB2A0952 manual Channel Change- Two options, Volume Buttons Press the Volume VOL

Power Button - Press the POWER button to

turn ON. Press again to turn OFF.

POWER

Volume Buttons - Press the VOLUME (VOL)

LEFT or RIGHT button for desired listening level (when On Screen menus are not displayed).

Located On Remote Control

_Increases

Decreases

Volume Level

Volume Level

Mute Button - Press the MUTE button to quickly

reduce sound level (Mute will appear on screen). Press again to restore sound.

MUTE

Helpful Hints:

•Helpful information will display On Screen momen- tarily when Receiver is first turned on and when the channel is changed.

•When using keyboard entry for channels 10,11 and 12 in the CABLE mode there is a slight delay before

channel change because of the capability of tuning cable channels 100 to 125.

NOTE: If "SPEAKER OFF" is displayed On Screen after pressing the VOLUME button, refer to Audio menu to turn Speakers "ON".

Channel Change- (Two options)

Option 1.

Press the CHANNEL (CH) UP or DOWN button to sequentially scan through programmed channels (when On Screen menus are not displayed).

NOTE: TV/VCR/CABLE switch (located on Remote)

must be set in TV position).		TVNC_CAB_
Located On Remote	Control
_=_====_._	_	Selects Next

___ Higher Channel

Selects Next /-

Lower Channel

Option 2.

Press two digits on keyboard (Example press 0, then 5 for channel 05). For channels over 99, press three

digits on keyboard.
I®	®	®1
I		®1 I
1(9		®1

VCR Function Buttons - TheVCRFUNC-

TIONbuttons have been designed to operate numerous brands of VCRs. The infra-red code must be obtained

prior to use. (Please refer to Programming the Universal Remote for programing instructions.)

NOTE: The TVNCR/CABLE switch (located on Re- mote) must be in the VCR position (Center).

TV/VCWCABLE

I- VCR 1

POWER RECORD I

F--7 II_ _

REW PLAY FF

[-_-] _ _-7

MOVE SIZE PIP

TVNCR STOP PAUSE

[CS]F--iT r---]

FREEZE SEARCH SWAP

VCR CHANNEL

r--_-i r-Tl

PIP CHANNEL

-12-