TV/Video Button - Press the TVNIDEO button
to select desired input for Main Picture or PIP frame (when the PIP frame is displayed).
TVNIDEO
Signal connected to: |
| Main Picture |
|
|
|
| |
REAR VIDEOIAUDIO INPUT 2 JACKS |
| VIDEO | 2 I |
| / | ||
|
|
| |
REARINPUTVIDEO/AUDIO1 JACKS _ |
| VIDEOlJ | I |
"IV or CABLE |
|
|
|
|
| CH 02 ___ |
|
Signal connected to:
REARVIDEO/AUDIOINPUT2JACKS'_ 1 PIPVIDEO2I
REAR VIDEO/AUDIO | _ | PiP VIDEO | 1 I | I | |
INPUT | 1 JACKS | / | , | ||
TV or CABLE | _ |
| PiP CHr_02 _J |
|
|
|
|
| L___ | PIP | Frame |
Recall Button - Press the RECALL button to review:
•Audio Mode status
•CH number or Video Input selected
•Sleep Timer status
•Clock time
•Channel Caption (Station Identifier)
RECALL | SAP | CH 03 | |
MONO | XYYZ | ||
|
_) | 29 | 1:00 |
R-Tune (Rapid Tune) - PresstheR-TUNE
Multi Button
The MULTI button can be programmed to operate up to 6 Remote function buttons at the same time.
For Example: TV Power/On, VCR Power/On (selected
brands) can be operated at the same time with one press of the MULTI button.
PROCEDURE
1.First program the Remote for the selected VCR
Control is compatible with the equipment.
2.Face the Remote Control transmitter away from all equipment remote sensors.
3.Press the Remote TV POWER button and the
MULTI button simultaneously. (All previous commands are erased.)
(TV)
POWER MULTI
PRESS SIMULTANEOUSLY
4.Press a maximum of 6 Function buttons on the Remote.
Each button you press is equal to one function. If six Remote button functions are entered, all will register in the MULTI button memory in the sequence entered. When less than six Remote button functions are entered, press the MULTI button to end the program mode. (Waiting more than 30 seconds without pressing another button will also end the program mode.)
The following is an example of Remote functions that can be programmed into the MULTI button.
-"IV Power- For turning TV ON and OFF.
-VCR Power - For turning VCR ON and OFF (selected brands after programming
Both can be turned ON or OFF with one press of the MULTI button.
(TV) VCR
POWER
<_POWERMULT<_
To delete entered functions - Press the Remote
TV POWER and MULTI buttons simultaneously.
Now you can enter from one to six different Remote
functions.(TV)
(RAPID TUNE) button to instantly switch between the last two channels selected (without any On Screen display being activated).
NOTE:
POWER MULTI
PRESS SIMULTANEOUSLY
CHANNEL NOW | CHANNEL | TUNED |
BEING VIEWED | IMMEDIATELY | BEFORE |
Press Button
.=
Press Button Again
• .
tus
You can also program the MULTI button to perform most individual Remote Control button functions.
Buttons which continuously perform a function as long as pressed (Volume Up/Down, Channel
Up/Down, etc.) cannot be programmed. Only those buttons which perform a function when initially pressed (Power On/Off, Mute, Direct Channel Entry, etc.) can be programmed.