Programming The Universal Remote Control

Programming The Universal Remote Control

VCR

Preferred Procedure - Code Known

Programming Universal Remote Using Infra-Red Access Codes for VCRs

•Determine brand of VCR.

•Identify Code(s) associated with the brand in the infra-red code index for VCRs (located in this manual).

Procedure

1.Place the Remote TVNCR/CABLE switch into the

VCR position (Center). WlVCWCABUE

2.Press and hold VCR POWER button down on

Universal Remote. VCR

POWER

3.Enter two digit code using keyboard "0 through 9" buttons. Release VCR Power button. The Universal

Remote is now programmed.

NOTE: Some brands have multiple codes. Repeat procedure using each code listed until VCR responds correctly.

Alternate Procedure - Code Unknown

Programming Universal Remote Using the "Sequence Method" for VCRs

•Confirm VCR is plugged in and operating properly, then turn OFF.

Procedure

Cable Converter Box

Preferred Procedure- Code Known

Programming Universal Remote Using Infra- Red Access Codes for Cable Television

Converter Boxes

•Determine brand of Cable Television Converter box.

•Identify code(s) associated with the brand in the infra-red code index for Cable Television Converter

boxes (located in this manual). Procedure

!.Place the Remote TVNCR/CABLE switch into the CABLE position (Right). "rvAtCR/CABLE

2.Press and hold the CABLE POWER button down on

Universal Remote. CABLE

POWER

F--]

3.Enter two digit code using keyboard "0 through 9" buttons. Release CABLE Power button. The Universal

Remote is now programmed. Use the Remote CHANNEL UP/DOWN buttons for selecting Cable

Converter Box channels.

NOTE: Some brands have multiple codes. Repeat procedure using each code listed until Cable Television Converter box responds correctly.

Alternate Procedure - Code Unknown

Programming Universal Remote Using the

"Sequence Method" for Cable Television

Converter Boxes

•Confirm Cable Television Converter box is plugged in and operating properly, then turn OFF.

1.Place the Remote TVNCR/CABLE switch into the

VCR position (Center). WNC_CAB,

2.Press and hold the VCR POWER button down on

Universal Remote. VCR

POWER

. Press VOL RIGHT button repeatedly. Check for the VCR to turn ON after each press. When the VCR

turns ON, release VCR Power button. The proper infra-red code has now been accessed.

NOTE:

1.Itmay take several attempts before the correct code is found.

2.The VOL LEFT button can be used to return to a code that was accidently passed by.

3.Some Remote Controls may have unique operating functions for some buttons. For Example: The POWER button may only turn the VCR OFF as opposed to both ON and OFF. it will then be necessary to modify the procedure. Turn the VCR

ON and repeatedly press the VOL RIGHT button until the VCR turns OFF.

Procedure

1.Place the Remote TVNCR/CABLE switch into the CABLE position (Right). WNCFVCAaUE

2.Press and hold the CABLE POWER button down on

Universal Remote. CABLE

POWER

3.Press VOL RIGHT button repeatedly, Check for the Cable Television Converter box to turn ON after each

press. When the Cable Television Converter box turns ON, release Cable Power button. The proper infra-red code has now been accessed.

NOTE:

•It may take several attempts before the correct code is found.

•The VOL LEFT button can be used to return to a code that was accidently passed by.

•Some Remote Controls may have unique operating functions for some buttons. For Example: The POWER button may only turn the Cable Television Converter box OFF as opposed to both ON and OFF. It will then be necessary to modify the procedure. Turn the Cable Television Converter box ON and repeatedly press the VOL RIGHT button until the Cable Television Converter box turns OFF.

NOTE: When operating equipment (VCR or Cable Converter box) with the Universal Remote Control, the TV/VCR/CABLE Switch should be set to the same position where the Access Code was first programmed for the equipment. Otherwise, leave the switch in the TV position.

- 38-