Auto Program
ACTION
Displays and Exits Menus
Located On Remote Control
Highlight Desired
Feature When
Menu is Displayed
Selects or Adjusts
Features When
Menu is Displayed
Auto Programming - The Auto Programming
feature allows you to place all channels with a video
signal into Channel Scan Memory when you press the CHANNEL UP or DOWN button.
NOTE: TV or Cable Tuning mode must be set properly for your system.
1.Press the ACTION button to display the Main Menu.
2.Press the CH UP/DOWN and VOL LEFT/RIGHT button to highlight the Set Up Icon.
3.Press the ACTION button to display the Set Up
Menu.
SET UP
SET TIME | 8 : 23 AM |
SET DAY | SUN |
I MANUAL | PROGRAM |
4.Press the CH UP or DOWN button to highlight "AUTO PROGRAM",
5.Press the VOL LEFT or RIGHT button to start Auto
Programming Scan. Channels will automatically advance until all channels have been scanned.
•Channel numbers with video signal present will turn blue which indicates stored in Channel Scan
memory.
6.Press the ACTION button twice to exit.
NOTE: Some channels with very weak signals may be locked into memory. These must be deleted manually using the Manual Program feature,
Helpful Hints:
After Auto Programming:
Blue channel number indicates channel is in Channel Scan memory.
All channels are available by direct access using the; Keyboard numbers "0 through 9".
After Auto Programming Scan has completed, up to 15 channels will be programmed into the FAVORITE Channel Scan if space is available. Any original channels that were programmed into FAV CHANNEL will remain, (Refer to Favorite Channel Scan for deleting unwanted channels.)
- 36 -