Panasonic TQB2A0952 Cable Power Button The Cable Power, Audio will be that of the Main Picture

Cable Power Button - The CABLE Power

button on the Remote Control has been designed to operate selected brands of Cable Converter Boxes. The proper Cable Converter Box infra-red code must be obtained prior to use. (Please refer to Programming the Universal Remote for programming instructions.) The

TVNCR/CABLE switch should be in the cable position. NOTE: Use the Channel UP and DOWN buttons on the

Remote for selecting Cable Converter Box

Channels.

CABLE

POWER

Located On Remote Control

Use to select Cable Box

Channelsafterprogramming

Infra-redCode.

PIP Swap Button - Press the SWAP button (when the PIP frame is displayed) to interchange what is

being viewed on the Main Picture with that of the PIP frame.

CH 021	VIDEO 1
PIP VIDEO 1	PIP CH 02

•Audio will be that of the Main Picture.

PIP Size Button - Press the SIZE button (when

the PIP frame is displayed) to choose either the large or small PIP frame.

PIP (Picture in Picture) Button- This

feature allows monitoring one channel while watching another when a second video source with a tuner is

connected (such as a VCR) to the television.

•The TV/VCR/CABLE Switch should be in the TV position (LEFT) before operating PIP buttons.

•S-Video connection will also operate the PIP feature (refer to OPTIONAL S-VIDEO VHS CONNECTION section).

•When the Main Picture is in Video mode with no signal, the PIP will not operate properly.

PIP Operation

1.Turn VCR ON and select a desired channel.

2.Press the PIP button (television must be ON). The PIP frame will appear at the position it was last dis- played. The Main Picture Video Source and PIP Vid-

eo Source will display on screen momentarily. Audio will be that of Main Picture.

3.Press the PIP button again to cancel PICTURE IN PICTURE feature (if desired).

NOTE: For PIP Video source connection, refer to PIP

External Video and Antenna Connections section.

/

Large PIP Frame SmallPIPFrame

--14-