Panasonic TQB2A0952 manual Mode TV/Ant or Cable, TV/Ant or Cable Tuning Mode

Mode (TV/Ant or Cable)

ACTION

Displays and Exits Menus

Located On Remote Control

Highlight Desired

When

Menu is Displayed

Selects or Adjusts

Features When

Menu is Displayed

TV/Ant or Cable Tuning Mode

IMPORTANT NOTE: The proper input mode must be selected to match the type of signal at the antenna input (TV or Cable).

•TV is used when the Receiver is not connected to a Cable TV System, for example, when using a VHF/

UHF antenna (Channels 02-69).

•CABLE is used when the Receiver is connected to a Cable TV System and you are not using a cable company converter box (Channels 01-125).

NOTE: Some Cable TV Systems encode (scramble) program material on specific channels. A cable company supplied decoder is required to

reproduce an acceptable picture. Certain Cable TV Systems offset some channels to reduce interference. It will be necessary to use the cable company supplied converter to receive these specific channels.

1.Press the ACTION button to display the Main Menu.

2.Press the CH UP/DOWN and VOL LEFT/RIGHT buttons to highlight the Set Up Icon.

3.Press the ACTION button to display the Set Up Menu.

SET UP

SET TIME 8_

AUTOMANUALPROGRAMNNNOI

4.Press the CH UP or DOWN button to highlight "MODE".

5.Press the VOL LEFT or RIGHT button to select TV/ ANT (mode) or CABLE (mode).

6.Press the ACTION button twice to exit.

- 35 -