Orion 21FVD Manual Tuning, Colour System, PAL or SECAM. Then press the Enter, To Skip a Channel

TUNING THE TV CHANNELS (CONTINUED)

In certain areas of the countries which have poor reception the Automatic Tuning System may not tune your unit to the strongest broadcast signal. If you are not satisfied with the automatic tuning then select the Manual Tuning.

MANUAL TUNING

1 Press TV/VCR to select TV/VCR mode.

Press MENU.

Press ▲ or ▼ to select the CHANNEL SETUP mode, then press ENTER.

2 Press ▲ or ▼ to select the CH

TUNING mode, then press

ENTER.

	TIMER REC SET
	AUTO REPEAT		[OFF]
	CHANNEL SETUP
	TV SETUP
	SYSTEM SETUP
SELECT : ▲▼
ENTER		: ENTER
EXIT		: MENU

CHANNEL SETUP

CH TUNING

AUTO TUNING

CH ALLOCATION

SELECT : ▲▼

ENTER : ENTER

EXIT : MENU

3 Press the ▲ or ▼ button to select ￿￿￿￿￿￿￿￿￿￿			￿￿￿
the Colour System, PAL or	￿￿	￿￿￿￿￿￿￿￿		￿￿￿￿
SECAM. Then press the ENTER.

TO SKIP A CHANNEL

To skip unwanted channels press CH/ PAGE to select the channel you want to skip. Then press CANCEL. The channel number flashes.

To cancel the skip setting, select the skipped channel using Direct Channel Selection, then press CANCEL.

4

5

Press or to search the broadcast stations. Each time a station is found the search will stop. Press or to continue searching until all the stations you want are found, then press ENTER to store the station you have selected.

If you can not get a clear picture, press ▲ or ▼ until the picture becomes clear. When you have a clear crisp picture store this setting by pressing ENTER.

Press ▲ or ▼ to select the required channel number (1- 110). Press ENTER to store the channel number. The unit channels can be preset to different TV broadcast chan- nels anytime simply by repeating steps 4-5.

When all required stations have been set, press MENU 3 times to return to normal TV screen.

CH 1

PAL

SEARCH :/ F.TUNE :

EXIT : MENU

PAL		CH 1
CH	:	/ 0-9
OK	: ENTER EXIT : MENU

14