Orion 21FVD manual Recording a TV Programme, To Stop Recording Temporarily

RECORDING A TV PROGRAMME

NOTES:

•If the power is switched off during re- cording, the TV section shuts off and the VCR section continues to record.

•The selected channel cannot be changed during recording.

•If you try to change the channel while a recording is being made, “RECORDING IN PROGRESS” will appear on the TV screen for approx.

4 seconds.

•AUTO REWIND FEATURE:

This unit will automatically rewind and eject the tape when the tape has ended (except during OTR and TIMER REC).

•If the erase prevention tab has been removed, the tape will eject when REC/OTR is pressed.

•Although you cannot change the chan- nel while the unit is recording, you can still switch to DVD mode and watch a DVD without affecting the recording.

24

RECORDING AND VIEWING THE SAME TV PRO- GRAMME

1 To turn “ON” the TV/VCR, press Sub Power (). Press TV/VCR to select TV/VCR mode.

2 Load a cassette tape with the erase prevention tab intact.

3 Press SP/LP to select the desired tape speed SP or LP.

4 Press Direct channel selectionCH 2 or CH + or – to select the

channel to be recorded (Exam- ple: Channel 2).

5 Press REC/OTR.
“ ” and the channel number will
appear on the screen and the REC/	CH 2
OTR indicator will light.
REC/OTR
	INDEX

TO STOP RECORDING

Press STOP to stop recording. “ ” will appear on the screen.

TO STOP RECORDING TEMPORARILY

Press PAUSE/STILL to stop recording of unwanted material. “ ” will appear on the screen and the REC/ OTR indicator will blink on and off.

Press again to continue the recording.

REC/OTR CH 2

NOTE:

To prevent damage to the video head and video tape the pause function will stop the VCR operation after about 5 minutes.