Orion 21FVD manual TV Operation

TV OPERATION (CONTINUED)

NOTE:

If SLEEP is pressed when the unit is the REC mode, the clock will count down and the picture will shut off at the set time, but the recording continues.

MUTE

To cut off the sound, press this button once. The unit will be silenced and the symbol “MUTE” will appear on the screen. The muting can be released by pressing MUTE again or VOL + or –.

USING CH + OR – BUTTON

Press and release CH + or –.

For channels to change properly, they must be correctly tuned into the unit's memory (P.12-13).

QUICK VIEW

This button allows you to go back to the last channel selected by pressing QUICK VIEW. Press this button again to return to the last channel you were watching.

SLEEP

To set the TV to turn off at a set time, press SLEEP on the remote control. The clock will count down 10 minutes each time the button is pressed in the order of 120, 110, ..., 20, 10, 0. After the sleep time is programmed, the display will disappear and will reappear every 10 minutes. To confirm the sleep time setting, press SLEEP once and the remaining time will be momentarily displayed. To cancel the sleep time, press SLEEP repeatedly until the display turns to 0.

DISPLAY

Press DISPLAY. The current time, channel number, real time tape counter, tape speed and VCR operation will be indicated.

Press DISPLAY again to remove the call display.

TV/VCR mode or DVD mode

				VCR operation
Current time	TV/VCR			Channel No.
	11 : 30 SAT	CH	2

Auto Repeat

Tape In

01 : 30 : 21 SP

Tape Speed

Real Time Tape Counter

16