Orion 21FVD manual Playback Procedure, Press OPEN/CLOSE on the unit or the remote con- trol, Close

Page 41

NOTES:

If a non-compatible disc is loaded, “In- correct Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen according to the type of loaded disc. If these appear, check your disc again (see pages 36 and 52).

Some discs may take a minute or so to start playback.

• A “Prohibition” symbol may appear at the upper left of the screen.This sym- bol means either the feature you tried is not available on the disc, or the unit cannot access the feature at this time. This does not indicate a problem with the unit.

When you set a single-faced disc label downwards (i.e. the wrong way up) and press PLAY or OPEN/CLOSE on the unit, “Reading” will appear on the dis- play and then “Incorrect Disc” will be dis- played.

Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc contents the soft- ware producers designed, some play- back features may not be available. Also refer to the instructions supplied with the DVDs.

PLAYBACK PROCEDURE

1 Press OPEN/CLOSE on the unit or the remote con- trol.

The disc tray will open.

2 Place a disc onto the tray. Position it with the printed label side up, align it with the guides, and place it in its proper position.

3 Press PLAY or OPEN/

CLOSE.

The disc tray closes auto- matically.

On the screen, changes to “Reading” and then play- back will commence.

A menu screen may ap- pear on the TV screen, if

the disc has a menu fea-

Reading

ture. In this case, press

 

, , , or ENTER

 

to operate a menu fea-

 

ture.

 

4 Press STOP to end playback.

The unit memorizes the stopped point, depending on the disc. “” appears on the screen for approx. 4 seconds. Press PLAY to resume playback (from the stopped point).

If you press STOP again (“ ” appears on the screen) or unload the disc, the unit will clear the stopped point.

5 Then press OPEN/CLOSE. The disc tray opens.

Remove the disc and press Sub Power ().

The disc tray closes automatically and the unit turns off.

39

Image 41
Contents Combination 21 Flat TV and Video Recorder/DVD Video Player Mains Supply Contents FeaturesWhat is Moisture CONDENSATION? PrecautionsMoisture will Condense on the Unit in the Following Cases If YOU Experience the Above ConditionsPrecautions Rear Location of ControlsFront CH/PAGE + Remote ControlEffective Distance of the Remote Control Transmitter Battery InstallationBattery Cautions External Antenna Antenna ConnectionsUsing an AV Amplifier with built-in digital surround Using an Audio AmplifierConnections to Other Equipments Rear of unitInput Selection Enter ON-SCREEN Language SelectionDesired language. Then press Press Menu twice to return to normal TV screenExample To SET the ClockAuto Tuning Tuning the TV ChannelsExample To Change the TV Stations to Another Channel PositionTo Skip a Channel Manual TuningColour System, PAL or SECAM. Then press the Enter TV Operation Press Sub Power . Then press TV/VCR to select TV/VCR modeTV Operation Brightness Picture Control AdjustmentsContrast ColourChannel, until you cancel this setting To SET the on TimerTurning on the TV to channel 3 at 745, MONDAY-FRIDAY Press or to set the desired hour, then pressTo SET the OFF Timer Unloading LoadingTo Prevent Accidental Erasure To Record AgainSystem Setup mode Press the TV/VCR to select TV/VCR modeColour System mode Select your appropriate Colour Preparation SystemPlayback Digital Auto Tracking AdjustmentsTo Start Playback To Stop PlaybackNtsc Tape Playback Special PlaybackTo Watch a Tape Repeatedly Still Picture Frame by Frame AdvanceTo Stop Recording Recording a TV ProgrammeTo Stop Recording Temporarily Press Direct channel selectionCH 2 or CH + or to selectTimer Recording To SET DAILY/WEEKLY Timer Other Functions for Timer RecordingTo Confirm the Settings Setting changes as followsPress Direct Channel Selec ONE-TOUCH Timer Recording OTRTo View the Counter Display Using the Real Time Tape CounterPress Counter Reset to set the counter to Press Display Using Zero ReturnBegin playback or recording Press Stop Press Zero RETURN. The tape will rewindSearching for AN Index Mark Video Index Search System IndexPress Menu to return to normal TV screen Press TV/VCR to select TV/VCR mode. Then press MenuConnection to Camcorder Duplicating a Video TapeConnection to Another VCR Duplicating from Disc to Video Tape Push TEXT/MIX/TV TeletextBasic operation Magnifying How to call a specific sub-pageTo call a teletext Disc Preparation PREPARATION/STATUS Display of DiscStatus display of disc DVDPress DVD to select Setting Setup LanguagePress OPEN/CLOSE on the unit or the remote con- trol Playback ProcedurePress Play or Open CloseReview Playback Fast Forward PlaybackStill Playback Frame AdvanceMP3/JPEG CD information MP3/JPEG PlaybackMP3/CD playback ListPress OPEN/CLOSE Jpeg CD playbackPress OPEN/CLOSE or Play To display next list, press SkipSetting the Jpeg Interval Setting the Jpeg IntervalOff SecondsTure of MP3 and Jpeg files, only MP3 or When playing back a CD containing a mixJpeg files can be displayed on the file menu AllLocating Desired Scene ZOOMING/LOCATING Desired SceneZooming Repeat Playback Press Play Mode during playback or stop modeTitle, Chapter, Track Playback Repeat PlaybackProgram PLAYBACK/RANDOM Playback CD To cancel program play, select Clear at and press EnterProgram playback Random playbackChanging soundtrack language Changing Soundtrack LANGUAGE/SUBTITLESSubtitles Turning the Subtitles On and OffChanging Angles Changing ANGLES/TITLE SELECTION/DVD MenuTitle Selection DVD MenuStatus on screen display Setting the aspect ratio of TV screenLetterbox PanscanDynamic Range Control Press number buttons 0-9 to input a 4-digit password Parental Control SettingTER Depending on the discs, the unit can- not limit playbackNumber buttons 0-9 to To Change the Parental LevelIf you interrupt the entering Temporary Disabling of Rating Level by DVD DiscNumber buttons Or Enter Setting Menu LanguageEnglish, Francais, Espanol, Deutsch, Italiano OtherAutomatic Setting Subtitle LanguagePress or Enter Then press To select Subtitle Original Setting Audio Soundtrack LanguageThen Press To select Audio Language Code List Power Before Requesting ServiceTV Broadcast Reception VCRRemote Control Before Requesting ServiceTelevision SpecificationsJ5N20401A SH 05/11 Battery compartment How to install the batteriesAntenna Connections Connect as follows Antenna socket Mains leadMain power on switch Power OnOn-screen language selection Press Menu repeatedly until the normal TV screen appearsPress the / button to select Channel presetTo set the clock Playback will commence Playback procedure