OPERATION
Operation of rear panel
1 |
| 2 |
| 3 |
| 4 |
| 5 |
| 6 |
| 7 |
| 8 |
| 9 |
| 10 |
2 | SUB | SL | SR | FL | FR |
| WOOFER CENTER |
5.1 CH ANALOG OUTPUT
|
|
|
|
|
| Y | Pb / Cb | Pr / Cr |
L | R |
|
|
|
|
|
|
|
AUDIO | COAXIAL | OPTICAL | VIDEO |
| P - SCAN / COMPONENT | |||
ANALOG | OUTPUT | DIGITAL | OUTPUT |
| VIDEO | OUTPUT |
|
RGB OUTPUT
AV CONNECTOR SCART
| ON |
| I |
O | |
AC IN | OFF |
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT
REMOVE COVER. NO
1.REGION CODE: Indicates that the device is set to region code “2”.
2.5.1 CHANNEL: 5.1 channel analogue audio outputs for connection to AV receivers, amplifiers or active speaker systems.
Note:
The 5.1 audio track of
3.AUDIO L/R: 2 channel analogue audio outputs (white/red socket) for connection to a television, AV receiver, beamer or stereo system.
4.DIGITAL: Digital coaxial/optical audio output for connection to a digital audio device (amplifier/receiver). Please note that the amplifier/receiver has to be compatible to dts, Dolby Digital, MPEG and/or PCM (for more information please refer to the manual of your amplifier/receiver).
“DTS” and “DTS Digital Surround” are trademarks of DTS, Inc.
5.VIDEO: Composite video output (yellow socket) for connecting to a television or AV receiver with a video input (CVBS, composite video) by an audio/video cable.
6.
7.YCbCR/YPbPr: High quality video output for connection to the compo- nent video inputs of a television, AV receiver, beamer or monitor by means of a YCbCr connecting cable. Please note that the
8.RGB/SCART: For connection to a television or monitor that is compat- ible with this kind of connection by means of a
10