Symphonic WF803 Playback Function, Normal Playback, Search Functions, Auto Repeat Playback

Page 18
INDEX SEARCH
03

PLAYBACK FUNCTION

NORMAL PLAYBACK

VCR

1Insert a prerecorded tape. The VCR will turn

on.

¡If the safety tab has been removed, the

VCR will start playback automatically.

2Turn on the TV and set the TV to channel 3.

¡If noise appears, change the RF output channel of the VCR to channel 4 by pressing PLAY for 3 seconds dur- ing playback. Then select the same channel (CH4) on your TV. (See “RF OUTPUT CHANNEL” on page 13 for the detail.)

3Begin playback by pressing PLAY.

¡Tracking adjustment will be done automatically (Digital Tracking function) when you start playback. To adjust the tracking manually, press SKIP/CH. on the remote or CHANNEL (o/p) on the VCR.

¡When a tape has reached the end, the VCR will rewind the tape to the beginning, and eject the tape.

4To stop playback, press STOP.

¡If no corresponding symbols appear on the display when you press buttons such as PLAY, RECORD,

Dor E, that means no cassette tape is in the VCR. Please insert a tape.

Counter Reset

¡You can reset the counter by pressing CLEAR/C.RESET on the remote control twice.

2Select "AUTO REPEAT" by pressing K or L.

3Begin auto repeat playback by pressing B so that ON appears next to "AUTO

REPEAT".

¡If the on-screen menu still remains, CLEAR/C.RESET to exit the menu.

¡To cancel the Auto repeat mode, press B at step [3] so that OFF appears next to "AUTO REPEAT".

SEARCH FUNCTIONS

VCR

PICTURE SEARCH

If you want to skip or repeat a scene during playback, press D or E.

¡Press it again and the VCR will now search at super high speed. (in the LP/SLP modes only).

INDEX SEARCH

An index mark will be assigned at the beginning of each recording you made. You may skip to a specific marked point by following the steps below.

1Press SEARCH MODE so that the Index Search menu appears.

2Enter the number of recordings you wish to

skip by pressing K or L within 30 seconds.

STILL/SLOW

You can freeze the picture on TV screen by pressing PAUSE during playback.

¡You can advance the picture one frame at a time by pressing PAUSE during the Still mode.

¡You cannot manually adjust the tracking of a still picture. However, if the picture begins to vibrate vertically during the still mode, you can stabilize the picture by pressing CHANNEL (o/p).

¡If the picture is distorted or rolling vertically, adjust the vertical hold control on your TV, if so equipped.

¡You can watch in the slow motion by pressing SLOW during playback or the still mode.

¡If a noise bar appears on the TV screen, you can reduce it by pressing CHANNEL (o/p).

¡After the VCR has been in Still/Slow mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage.

¡To return to playback, press PLAY.

AUTO REPEAT PLAYBACK

VCR

This feature allows you to play a tape over and over.

1Select main menu by pressing MENU.

3Press B or { to start index search.

¡If you want to go in the forward direction, press B. ¡If you want to go in the reverse direction, press {. ¡If you want to stop search function, press STOP.

¡After index search, the VCR will play the tape auto- matically.

TIME SEARCH

This feature allows you to go to a specific point on a tape by entering the exact amount of time you wish to skip in order to reach the point.

1Press SEARCH-MODE so that the Time Search menu appears.

2 Enter your desired time to

TIME SEARCH

skip by pressing K or L

2 : 50

 

within 30 seconds.

 

3Press B or { to start time search.

¡If you want to go in the forward direction, press B. ¡If you want to go in the reverse direction, press {. ¡If you want to stop search function, press STOP.

¡After time search, the VCR will play the tape auto- matically.

– 18 –

EN

1L25

Image 18
Contents WF803 Laser Safety Important Safeguards Supplied Accessories Symbols Used in this ManualAbout Copyright Table of Contents IndiceFeatures PrecautionsAbout the Discs Playable DiscsFollowing discs can be played back on this Operating Controls and Functions Press to access the VCR menu Light appears when a disc is in the DVD PlayerPress to select DVD mode for the remote control Press to enter DVD player setup modeUse to select VCR or TV position Press to select VCR mode for the remote controlConnect to a standard AC outlet to supply power to To watch TV or to view one program while recording anotherLoading the Batteries DVD Analog Audio OUT JacksVCR/DVD Switching DVD ModeConnecting to a TV Without A/V Terminals Connecting to a TV with A/V TerminalsHookups For TVs with S-VIDEO Input Jack Connecting to a Receiver with Dolby Digital Decoder Connecting to AN Analog Audio SystemTo Preset the Channels Again SetupAutomatic Channel SET UP To Select a Desired ChannelClock SET UP To Change the ON-SCREEN LanguageTo ADD/DELETE Channels Search Functions Playback FunctionNormal Playback Auto Repeat PlaybackTimer Recording Recording FunctionNormal Recording Hints for Timer To Stop AN Automatic Timer PRO- Gram Already StartedTo CHECK, CORRECT, or Cancel AN Automatic Timer Program Special Features Copying a Video TapeTo Monitor the Recording Auto Rewind General FeaturesPlaying a Disc Basic PlaybackStep by Step Playback Disc MenuTitle Menu Fast FORWARD/REVERSE SearchTitle / Chapter Search ZoomTrack Time SearchRepeat Title / Chapter RepeatProgram Repeat TrackON-SCREEN Information Random PlaybackMP3 Playback Track SelectionAudio Language Stereo Sound ModeSubtitle Language Camera AngleParental Level Changing the ON-SCREEN DisplayParental Control ¡The elapsed and remaining Playing time of the currentDVD Setup Marker Setup ScreenAudio Setting ¡Be sure to press SETUP, or the setting will not work Black Level SettingDisplay Setting Virtual SurroundLanguage Setting Troubleshooting Guide Problem Corrective ActionMaintenance ServicingSpecifications Controles DEL Funcionamiento Y SUS Funciones Panel DelanteroBotón Stop DVD Visión Trasera Cambio DE VCR/DVD Modo VCRConexiones PreparaciónReproduciendo UN DVD Video O UN CD Audio Reproducción DE UN DiscoPreparación DE Reloj Pasos InicialesMemo Memo Memo Customer Service North Street Teterboro, NJ H9402UD