Symphonic WF803 owner manual Playing a Disc, Auto Rewind, Basic Playback, General Features, Pause

Page 22

AUTO REWIND

REAL TIME TAPE COUNTER

When a tape reaches the end during recording, play- back, or fast-forward, the tape will automatically rewind to the beginning. After rewinding finishes, the VCR will eject the tape and switch itself off.

¡The VCR will not rewind the tape automatically dur- ing timer recording or One Touch Recording.

¡This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change during blank portions of the tape.)

¡The indication will appear when the tape is rewound further than “0:00:00” on the tape counter.

PLAYING A DISC

BASIC PLAYBACK

DVD-V CD

Getting started

¡Turn on the power of the TV, amplifier and any other components which are connected to the DVD.

¡Make sure the TV and audio receiver (commercially available) are set to the correct channel.

¡Select DVD mode by pressing DVD on the remote control or output on the front panel.

1Press POWER.

2Press OPEN/CLOSE to open disc loading tray.

3Place the chosen disc in the tray, with the label facing up.

4Press PLAY.

¡The tray will close automatically, and playback will then start from the first chapter or track of the disc. If the playback does not start automatically, press PLAY.

¡When you playback the DVD which a title menu is recorded, it may appear on the screen. In this case, refer to “TITLE MENU” on page 23.

5Press STOP to stop playback.

Notes

¡A “prohibited icon” may appear at the top-right on the TV screen during operation, warning that a pro- hibited operation has been encountered by the DVD or the disc.

¡With DVDs that use titles for playback program sig- nals, playback may start from the second title, or it may skip these titles.

¡During the playback of a two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a mal- function.

GENERAL FEATURES

DVD may contain menus to navigate the disc and access special features. Press the appropriate Number buttons or use Arrow (L/K/s/B) to highlight your selection in the DVD main menu and press ENTER to confirm.

Note

¡Unless stated, all operations described are based on remote control use. Some operations can be carried out using the menu bar on the TV screen.

PAUSE

DVD-V CD

1During playback, press PAUSE.

¡Playback will pause and sound will be muted.

2To continue playback, press PLAY.

– 22 –

EN

1L25

Page 21 Page 23
Image 22
Page 21 Page 23
Contents WF803 Laser Safety Important Safeguards Symbols Used in this Manual Supplied AccessoriesAbout Copyright Table of Contents IndiceFeatures PrecautionsPlayable Discs About the DiscsFollowing discs can be played back on this Operating Controls and Functions Press to access the VCR menu Light appears when a disc is in the DVD PlayerPress to select DVD mode for the remote control Press to enter DVD player setup modeUse to select VCR or TV position Press to select VCR mode for the remote controlConnect to a standard AC outlet to supply power to To watch TV or to view one program while recording anotherLoading the Batteries DVD Analog Audio OUT JacksVCR/DVD Switching DVD ModeConnecting to a TV with A/V Terminals Connecting to a TV Without A/V TerminalsHookups For TVs with S-VIDEO Input Jack Connecting to a Receiver with Dolby Digital Decoder Connecting to AN Analog Audio SystemTo Preset the Channels Again SetupAutomatic Channel SET UP To Select a Desired ChannelTo Change the ON-SCREEN Language Clock SET UPTo ADD/DELETE Channels Search Functions Playback FunctionNormal Playback Auto Repeat PlaybackRecording Function Timer RecordingNormal Recording To Stop AN Automatic Timer PRO- Gram Already Started Hints for TimerTo CHECK, CORRECT, or Cancel AN Automatic Timer Program Copying a Video Tape Special FeaturesTo Monitor the Recording Auto Rewind General FeaturesPlaying a Disc Basic PlaybackStep by Step Playback Disc MenuTitle Menu Fast FORWARD/REVERSE SearchTitle / Chapter Search ZoomTrack Time SearchRepeat Title / Chapter RepeatProgram Repeat TrackON-SCREEN Information Random PlaybackMP3 Playback Track SelectionAudio Language Stereo Sound ModeSubtitle Language Camera AngleParental Level Changing the ON-SCREEN DisplayParental Control ¡The elapsed and remaining Playing time of the currentMarker Setup Screen DVD SetupAudio Setting ¡Be sure to press SETUP, or the setting will not work Black Level SettingDisplay Setting Virtual SurroundLanguage Setting Troubleshooting Guide Problem Corrective ActionMaintenance ServicingSpecifications Controles DEL Funcionamiento Y SUS Funciones Panel DelanteroBotón Stop DVD Visión Trasera Cambio DE VCR/DVD Modo VCRConexiones PreparaciónReproduciendo UN DVD Video O UN CD Audio Reproducción DE UN DiscoPreparación DE Reloj Pasos InicialesMemo Memo Memo Customer Service North Street Teterboro, NJ H9402UD
Top Page Image Contents