Symphonic WF803 owner manual Recording Function, Normal Recording, Timer Recording

Page 19

RECORDING FUNCTION

Note

You can not copy a DVD to a videotape

VCR

It may be UNLAWFUL to record copy- righted material without the consent of the copyright owner.

Accidental Erasure Prevention

Record safety tab

To prevent accidental recording

on a

recorded cassette, remove its record safety tab. To record on it later, cover the hole with cellophane tape.

Before recording, make sure:

¡The desired channel is selected by pressing Number on the remote control or CHANNEL (o/p). (If you connected the VCR to a cable box or satellite box as in "CONNECTING TO A TV WITHOUT A/V TERMINALS" on page 13, select channel 3 on your TV, and select the specific INPUT channel assigned by your cable box or your satellite box on the DVD/VCR COMBINATION UNIT. Then, select the channel you want to record with the cable box or the satellite box. In this case, you can ONLY record and view the SAME channel.)

¡If noise appears, change the RF output channel of the VCR to channel 4 by pressing PLAY for 3 sec- onds during playback. Then select the same chan- nel (CH4) on your TV.

¡There is a tape with a safety tab in the VCR.

¡The desired recording speed is selected in SP (stan- dard play) or SLP (super long play) mode by press- ing SPEED on the remote control.

 

Tape Speed

 

Recording/Playback Time

 

Type of tape

T60

 

T120

T160

 

SP mode

1 hour

 

2 hours

2-2/3 hours

 

SLP mode

3 hours

 

6 hours

8 hours

NORMAL RECORDING

VCR

1Begin the recording by pressing RECORD. The REC Light comes on.

¡To temporarily stop recording or to resume it, press PAUSE. After the VCR has been in Pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage.

OTR (One Touch Recording)

VCR

This feature allows you to set the recording length sim- ply by pressing REC/OTR on the VCR.

1Press REC/OTR to begin OTR. The TIMER REC light comes on. Change the recording length by pressing REC/OTR repeatedly.

REC

OTR(0:30)

OTR(1:00)

(Normal recording)

 

 

OTR(8:00) OTR(7:30)

¡If a tape ends during OTR, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER REC light blinks. (If the DVD power is off, the VCR will become STANDBY status).

¡When OTR is finished , the VCR turns off automat- ically. To use the VCR again, press T-SET on the remote, or STOP/EJECT on the DVD/VCR COM-

BINATION UNIT.

TIMER RECORDING

VCR

You may set the VCR to start recording while you are away. You can set eight programs to record on specif- ic days, daily or weekly within 1 year period.

If you have not yet set the clock, "CLOCK SET" appears. If so, follow the steps [3] and [4] in "CLOCK SET UP" section on page 17. Then, set the timer recording.

1Insert a tape with its safety tab into the

DVD/VCR COMBINATION UNIT.

2Select main menu by pressing MENU.

3 Select "TIMER PROGRAM-

TIMER PROGRAMMING

PROG

12345678

MING" by pressing K or L.

DATE

-

Then, press B. The set up

START TIME

CHANNEL

 

END

TIME

screen is displayed.

REC SPEED

 

2Press STOP when the recording is completed.

Note

¡When you wish to watch another program while recording, select desired channel on your TV. If noise appears press VCR/TV.

¡This is not possible when using a cable box or satellite box.

4Set the timer.

¡To go back one step, press s.

1) Set the program number (1-8)

Program number which is not set up flashes. Press K or L repeatedly for the desired program number. Then, press B.

PROGRAM NUMBER 4

DATE - - / - - START TIME - - : - - - -

END TIME - - : - - - -

CHANNEL - -

REC SPEED - -

– 19 –

EN

1L25

Image 19
Contents WF803 Laser Safety Important Safeguards Symbols Used in this Manual Supplied AccessoriesAbout Copyright Indice Table of ContentsPrecautions FeaturesPlayable Discs About the DiscsFollowing discs can be played back on this Operating Controls and Functions Press to enter DVD player setup mode Light appears when a disc is in the DVD PlayerPress to select DVD mode for the remote control Press to access the VCR menuTo watch TV or to view one program while recording another Press to select VCR mode for the remote controlConnect to a standard AC outlet to supply power to Use to select VCR or TV positionDVD Analog Audio OUT Jacks Loading the BatteriesDVD Mode VCR/DVD SwitchingConnecting to a TV with A/V Terminals Connecting to a TV Without A/V TerminalsHookups For TVs with S-VIDEO Input Jack Connecting to AN Analog Audio System Connecting to a Receiver with Dolby Digital DecoderTo Select a Desired Channel SetupAutomatic Channel SET UP To Preset the Channels AgainTo Change the ON-SCREEN Language Clock SET UPTo ADD/DELETE Channels Auto Repeat Playback Playback FunctionNormal Playback Search FunctionsRecording Function Timer RecordingNormal Recording To Stop AN Automatic Timer PRO- Gram Already Started Hints for TimerTo CHECK, CORRECT, or Cancel AN Automatic Timer Program Copying a Video Tape Special FeaturesTo Monitor the Recording Basic Playback General FeaturesPlaying a Disc Auto RewindFast FORWARD/REVERSE Search Disc MenuTitle Menu Step by Step PlaybackTime Search ZoomTrack Title / Chapter SearchRepeat Track RepeatProgram Repeat Title / ChapterTrack Selection Random PlaybackMP3 Playback ON-SCREEN InformationCamera Angle Stereo Sound ModeSubtitle Language Audio Language¡The elapsed and remaining Playing time of the current Changing the ON-SCREEN DisplayParental Control Parental LevelMarker Setup Screen DVD SetupAudio Setting Virtual Surround Black Level SettingDisplay Setting ¡Be sure to press SETUP, or the setting will not workLanguage Setting Problem Corrective Action Troubleshooting GuideServicing MaintenanceSpecifications Panel Delantero Controles DEL Funcionamiento Y SUS FuncionesBotón Stop DVD Visión Trasera Modo VCR Cambio DE VCR/DVDPreparación ConexionesPasos Iniciales Reproducción DE UN DiscoPreparación DE Reloj Reproduciendo UN DVD Video O UN CD AudioMemo Memo Memo H9402UD Customer Service North Street Teterboro, NJ