Symphonic WF803 owner manual Hints for Timer, To Stop AN Automatic Timer PRO- Gram Already Started

Page 20
PROGRAM NUMBER 4
ONCE DAILY WEEKLY
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE - - / - - START TIME - - : - - - -
END TIME - - : - - - -
CHANNEL - -
REC SPEED - -
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE 05 /12 MON
START TIME - - : - - - -
END TIME - - : - - - -
CHANNEL - -
REC SPEED - -

2) Set the frequency of the recording

For once: Press K or L to point to "ONCE".

For daily (Monday~Friday): Press K or L to point to "DAILY".

For weekly: Press K or L to point to "WEEKLY".

Then, press B.

3) Set the date

First, press K or L for the month.

Then, press B. Next, press K or

Lfor the day. Then, press B.

4) Set the start time

First, press K or L for the hour. Then, press B. Next, press K or L

for the minute. Then, press B. And

then, press K or L for AM or PM. Then, press B.

5) Set the end time

 

 

ONE TIME PROGRAM

 

 

 

PROGRAM NUMBER 4

Follow the instructions of

DATE

 

05 /12 MON

START TIME 07: 30 PM

"Set the start time" to set

END

TIME - - : - - - -

CHANNEL

- -

REC SPEED

- -

the end time.

 

 

 

 

 

 

 

6) Set the channel number

 

ONE TIME PROGRAM

 

PROGRAM NUMBER 4

 

 

 

DATE

 

05 /12 MON

Press K or L repeatedly for the

START TIME 07: 30 PM

END

TIME 08: 30 PM

desired channel number. Then,

CHANNEL

- -

REC SPEED

- -

press B.

If you connected the DVD/VCR COMBINATION UNIT to a cable box or satellite box as in "DVD/VCR TO TV CONNECTION" on page 13, select the DVD/VCR to channel 3 or 4 the same channel as RF output channel of the DVD/VCR. Then, select the channel you want to record with the cable box or satellite box.

Leave the cable box or satellite box on for timer recording.

7) Set the tape speed

 

ONE TIME PROGRAM

 

 

PROGRAM NUMBER 4

Press K or L repeatedly for the

DATE

05 /12 MON

START TIME 07: 30 PM

desired tape speed. Then, press B.

END TIME 08: 30 PM

CHANNEL

16

REC SPEED SP

SP

SLP

¡If a tape ends during TIMER RECORDING, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER REC light blinks. (If the DVD power is off, the VCR will become STANDBY status).

¡If a tape is not in the VCR or does not have a safety tab, the TIMER REC light flashes and timer recording will not operate. Please insert a recordable tape.

¡When all timer recordings are finished, the TIMER REC light will flash. To use the VCR again as usual, press T-SET to disable the flashing TIMER REC light, then press VCR/TV to select the VCR position. Select either VCR or DVD mode, then continue with the other features as described in this manual.

¡When timer recordings are set, the TIMER REC light will come on. To use the VCR as usual until the time for the recording, press T-SET so that TIMER REC light disappears. Press VCR/TV to choose the VCR position. Select either VCR or DVD mode, then continue with the other features as described in this manual.

If you want to use the DVD player during a VCR timer recording or while the TIMER REC light is on or flashes.

¡You can use the DVD player while the TIMER REC light is on or flashes, or during a timer recording. Press POWER to turn on the DVD. Press DVD on the remote control to choose DVD mode, then continue with the other DVD features as described in this man- ual. You don’t have to set the TIMER off to use the DVD only.

TO STOP AN AUTOMATIC TIMER PRO- GRAM ALREADY STARTED

Press STOP/EJECT on the DVD /VCR COMBINA-

TION UNIT.

TO CHECK, CORRECT, OR CANCEL AN AUTOMATIC TIMER PROGRAM

1Press T-SET.

¡If the DVD output mode is selected, you have to switch it to the VCR mode by pressing the VCR on the remote control or the OUTPUT on the VCR.

 

 

 

2

Select main menu by pressing MENU.

5 To set another program, repeat step [4]. To

 

 

 

 

3

Select "TIMER PROGRAMMING" by press-

exit, press CLEAR/C.RESET.

 

ing K or L. Then, press B.

 

 

 

 

 

 

 

 

6 Press T-SET to set the timer.

 

 

 

 

4

Select the program number you want to

¡The TIMER REC light on the DVD/VCR COMBI-

 

check by pressing K or L.

NATION UNIT comes on. TIMER RECORDING

 

¡The details of the selected program appears on the

WILL NOT BE ACTIVATED UNLESS YOU

TV screen.

PRESS T-SET.

¡Go to the digit you want to change by pressing B or

 

 

 

 

 

 

s. Then, enter correct numbers by pressing oor p.

HINTS FOR TIMER

 

 

¡You may cancel the entire program by pressing s

RECORDING

 

 

while the program number flashes.

 

 

 

 

 

 

 

 

 

VCR

 

5

Press CLEAR/C.RESET to exit.

 

 

 

 

 

 

¡If there is a power failure or the VCR is unplugged

 

 

 

for more than 30 seconds, the clock setting and all

6

Press T-SET to return to timer stand-by mode.

timer settings will be lost.

 

 

 

– 20 –

EN

1L25

Image 20
Contents WF803 Laser Safety Important Safeguards About Copyright Supplied AccessoriesSymbols Used in this Manual Table of Contents IndiceFeatures PrecautionsFollowing discs can be played back on this About the DiscsPlayable Discs Operating Controls and Functions Light appears when a disc is in the DVD Player Press to select DVD mode for the remote controlPress to access the VCR menu Press to enter DVD player setup modePress to select VCR mode for the remote control Connect to a standard AC outlet to supply power toUse to select VCR or TV position To watch TV or to view one program while recording anotherLoading the Batteries DVD Analog Audio OUT JacksVCR/DVD Switching DVD ModeHookups Connecting to a TV Without A/V TerminalsConnecting to a TV with A/V Terminals For TVs with S-VIDEO Input Jack Connecting to a Receiver with Dolby Digital Decoder Connecting to AN Analog Audio SystemSetup Automatic Channel SET UPTo Preset the Channels Again To Select a Desired ChannelTo ADD/DELETE Channels Clock SET UPTo Change the ON-SCREEN Language Playback Function Normal PlaybackSearch Functions Auto Repeat PlaybackNormal Recording Timer RecordingRecording Function To CHECK, CORRECT, or Cancel AN Automatic Timer Program Hints for TimerTo Stop AN Automatic Timer PRO- Gram Already Started To Monitor the Recording Special FeaturesCopying a Video Tape General Features Playing a DiscAuto Rewind Basic PlaybackDisc Menu Title MenuStep by Step Playback Fast FORWARD/REVERSE SearchZoom TrackTitle / Chapter Search Time SearchRepeat ProgramRepeat Title / Chapter Repeat TrackRandom Playback MP3 PlaybackON-SCREEN Information Track SelectionStereo Sound Mode Subtitle LanguageAudio Language Camera AngleChanging the ON-SCREEN Display Parental ControlParental Level ¡The elapsed and remaining Playing time of the currentAudio Setting DVD SetupMarker Setup Screen Black Level Setting Display Setting¡Be sure to press SETUP, or the setting will not work Virtual SurroundLanguage Setting Troubleshooting Guide Problem Corrective ActionMaintenance ServicingSpecifications Controles DEL Funcionamiento Y SUS Funciones Panel DelanteroBotón Stop DVD Visión Trasera Cambio DE VCR/DVD Modo VCRConexiones PreparaciónReproducción DE UN Disco Preparación DE RelojReproduciendo UN DVD Video O UN CD Audio Pasos InicialesMemo Memo Memo Customer Service North Street Teterboro, NJ H9402UD