Preparation
| Attaching the stand unit | 4 Attaching the stand cover. |
| 1 Insert the stand cover. | |
• | Before performing work, spread cushioning over the surface | 2 Insert and tighten four short screws into the holes of |
the stand cover. | ||
| on which you will be laying the TV. This will prevent it from |
|
| being damaged. |
|
CAUTION |
| |
• | Attach the stand in the correct direction. |
|
• | Be sure to follow the instructions. Incorrect installation |
|
| of the stand may result in the TV falling over. |
|
1 Confirm that there are screws with the stand unit. |
| |
| (Eight long screws and four short screws) |
|
2Attach the supporting post for the stand unit onto the base using the long screws with a screwdriver as shown.
NOTE
•To detach the stand unit, perform the steps in reverse order.
•A screwdriver is not supplied with this product.
Supporting post
Front
3Insert the stand into the openings on the bottom of the TV (hold the stand so it will not drop from the edge of the base area).
Soft cushion
8